Filter by
Price
Type part
more... less
Brand
more... less
Filter

espresso machine brands

Unveiling the Origins of Espresso Tradition

The journey of lever operated espresso machines began in the early 20th century in Italy, where coffee culture flourished in bustling cafes and espresso bars. Seeking to simplify the art of espresso brewing, inventors introduced lever machines, revolutionizing the way coffee was made and enjoyed. These early innovations laid the foundation for modern espresso technology, shaping the course of coffee history for decades to come.

La Cimbali lever group piston

La Cimbali brass lever group piston. The piston keeps both springs on it's place and guides them. on the top of the piston the piston shaft is screwed into the top. The piston doesn't come with the seals. they can be found thereReturn to the La Cimbali M15 overview page
€147.49

Faema E61 brass camme lever rod

The item shown on this page is a cam shaft which is used on the Faema E61 and various other E61 style of brewing groups.  Such as Bezzera and La Pavoni e61 style groups. The Faema part reference for this item 3161136650, the Bezzera part reference is 7479950 and for La Pavoni the reference is 314077. This brass cam shaft has a overall length of 82mm. The...
€18.27

Bezzera gasket holder

On this page you will find a brass Bezzera gasket holder, which is suitable for a variety of Bezzera espresso machine models. The Bezzera part references for this item are 7496003 and 5970504. This brass gasket holder normally holds the gasket with the dimensions 19x3.5x4mm, this item does not come with this gasket. To hold this gasket in place there is a...
€14.66

Faema lever joint guide left

On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...
€9.60

Conti lever spring

The lever brewing group spring on this page can be used on the Conti lever brewing group.  This compressions spring has a diameter of 52mm and a overall length of 136mm. Note springs always have a deviation.  
€26.24

Gaggia flat rubber gasket

This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18

La Pavoni Europiccola level glass

The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...
€4.16

Faema E61 group lever

The small lever shown on this product page is a control lever for starting and stopping the brewing process on the Faema E61 espresso machines. The Faema part reference for this item is 2819136651  This item has been made out of casted aluminium. The small roller installed is made from brass and fixed with a brass rivet. This control lever does not come...
€18.35

Conti portafilter double spout

The portafilter on this product page is a 2 coffee portafilter which can be used on the Conti lever espresso machine groups, as well as the regular solenoid valve operated brewing groups. The filter holder body has the Conti part reference number 4056791. The portafilter has a ear orientation of 90 degree, with a thickness of the ears of 7,5mm. This...
€67.03

Astoria portafilter gasket 66x56x6mm

On this page you will find a portafilter gasket specially suited for lever espresso machine brewing groups. This specific portafilter gasket is suitable for brands such as the Astoria, Pavoni, Wega, Victoria Arduino, Fiorenzato and Brasilia lever groups. (seen they are the same model of group) This specific gasket has been made from NBR. This gasket has a...
€3.18

XP110 pressure switch 0,5 - 1,5 bar 1/4"

On this product page you will find one of the most commonly used pressure switches. The Ma-Ter XP110 pressure switch. This pressure switch is rated from 0,5bar up to 1,5bar. The pre-calibrated pressure is 1 bar. The brass fitting has a male ¼” BSP-G thread on it. This switch is rated to 16A at 125/250V.
€20.04

Faema E61 group spring 14x33mm

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the bottom exhaust valve. When the lever is in the lowest position the valve assembly will push this spring inward and the exhaust valve will open completely. This will make sure that all the exhaust water goes out...
€2.17

Lever group spring 140mm

On this page you will find a lever brewing group main spring. This spring is used to generate the pressure. This type of spring is quite common and will find it in a variety of lever espresso machines. This model has a overall length of 140mm and a outer diameter of 46mm. this spring has been made from standard spring steel and after that it got...
€34.56

La Pavoni europiccola steam stem 3 holes

The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...
€14.58

La Cimbali group locking nut

La Cimbali group locking nut. these nuts screw the inner flange of the brewing group to the brewing group itself. Which makes a air and water tight. Return to the La Cimbali lever parts overview
€6.51

E61 style lever brewing group

On this product page you will find a complete E61 style brewing group. There are a variety of E61 style brewing groups. Examples of this are the Solenoid valve groups, with the solenoid valve at the bottom, or on the sides. This E61 style brewing group can be used on Fiorenzato, Grimac and La Scala espresso machines. The Fiorenzato part reference fort his...
€365.68

Pavoni pre-millenium tamper 49.5mm Birch

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...
€67.94

Arrarex Caravel stainless tamper European walnut

On this page you will find our tamper for the VAM Caravel and Arrarex Caravel espresso machines. This coffee tamper has a diameter of 43mm. The tamper base has been made out of stainless steel, the handle is made from wood. To be specific european walnut. So make sure that you don’t dip the handle in water. The most important thing is for which model of...
€63.99

Faema P4 spring for valve

Faema spring for P4 valve. Suitable for:CodeProducer30370040 Expobar4731-103918 Faema4731103918 Faema08389900 Futurmat-Ariete10391803 Futurmat-ArieteL165/4 Marzocco311427 Pavoni9007705 Reneka10402014 SanremoMOLLAASTAREVO VibiemmeMOLLAASTARUBK Vibiemme
€1.38

Faema E61 valve gasket 13x4x4mm

The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
€0.74

Faema E61 microswitch lever control bracket

If you are restoring a Faema E61 or rebuilding a Faema E61 legend it is possible that you find a broken lever mechanism bracket. Now you can replace them. If you start the brewing process on your Faema E61 group, you raise your lever control arm. This pushes down the micro control lever. This control lever is attached to a metal rod. This metal rod is...
€6.24

Faema Marte/Mercurio lower gasket

Faema Marte/Mercurio lower gasket. this is the gasket which makes the inner sleeve water tight.This sleeve can only be safely removed with a custom made key. you can try it with a punch, this can work. but the chance on damaging the part is also present.Return to the Faema parts overview
€17.66
Arrarex Caravel portafilter Arrarex Caravel portafilter
  • Out-of-Stock

Arrarex Caravel portafilter

There we have a re-production of a original Arrarex Caravel portafilter. The portafilter has been casted out of stainless steel and with a black delrin handle. This is a normal version, so not a bottomless one. It is suited for the same style portafilters for the Arrarex Caravel and the VAM Caravel lever espresso machines Return to the Arrarex Caravel...
€124.63

Arrarex Caravel: A Beacon of Innovation

Founded in the 1950s, Arrarex Caravel quickly rose to prominence with its groundbreaking lever operated espresso machines. The Caravel, the company's flagship model, combined compact design with innovative lever mechanisms, revolutionizing home espresso brewing. Loved for its simplicity and exceptional performance, the Caravel remains a beloved classic among coffee connoisseurs and collectors alike.

La Cimbali: Precision Engineering at Its Finest

La Cimbali, a stalwart in the coffee industry since 1912, is renowned for its commitment to precision engineering and superior quality. While best known for its commercial equipment, La Cimbali also produced exceptional lever operated machines. Models like the M1 showcased the brand's dedication to blending traditional lever brewing with modern technology, setting new standards for excellence in espresso craftsmanship.

Faema: Elevating Espresso to Art

Since its inception in 1945, Faema has been synonymous with innovation and sophistication in espresso machine design. While famous for its iconic E61 model, Faema also made its mark in the world of lever operated machines. These elegant devices, characterized by sleek aesthetics and precise engineering, continue to inspire coffee enthusiasts with their timeless appeal and exceptional brewing capabilities.

La Pavoni: A Testament to Italian Craftsmanship

Founded in 1905, La Pavoni holds a special place in the hearts of coffee lovers worldwide. The brand's iconic Europiccola and Professional models are beloved for their elegant designs and unparalleled performance. La Pavoni machines exemplify the artistry and tradition of Italian craftsmanship, offering a timeless charm that continues to enchant baristas and coffee aficionados to this day.

Bezzera: Pioneering Espresso Excellence

Bezzera, founded in 1901, is credited with inventing the first commercial espresso machine, laying the groundwork for modern coffee culture. Alongside its groundbreaking innovations, Bezzera also produced remarkable lever operated machines. With a legacy of over a century of innovation, Bezzera remains a trusted name in the coffee industry, revered for its commitment to quality and excellence.