Home

Rancilio Z11 level cover

Gaggia XD heating element 2 gr 4000/4760W 230VType flangedwatt 4000/4760volt 220/240length (mm) 310

This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...

Elektra 1 coffee filterbasket Return to the Elektra Micro casa parts overview

La San Marco inox brewing group rodReturn to the La San Marco parts overview

On this product page you will find the bearing pin used in a variety of lever espresso machines, such as Astoria, Wega, Pavoni and Brasilia. This pin has a knurled middle piece. On that location the chrome plated lever fork will be installed to. And next to that you will get 2 bearings. These are secured with 2 shaft clips. This item is OEM/Original...

This heating element style you will mainly find with La Cimbali espresso machines. This specific heating element is mainly used with 2 and 3 group espresso coffee machines. The reference part number for Cimbali for this part is 537-012-200 This heating element has a overall length of 390mm. The heating element produces 4500/5370W at 220/240V. The element...

Motta Europa milk pitcher 0,25L stainless steel

La Pavoni lever shaftReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview

This item is a brewing group water inlet tube which is used on various Gaggia C70/C80 brewing groups. This brewing group inlet tube is made from a copper tube which has been bend and flared at the ends. You do need to use this copper tube in combination with a nut. This item has limited availability.

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

On this page you will find a silicone sight glass gasket, with this seal there is a water tight seal between the glass and the body. This gasket can be used on the Elektra Microcasa lever espresso machine. This item has the Elektra part reference of 00119035 This silicone gasket has  a outer diameter of 15mm a inner diameter of 9mm and a thickness of 8mm.

The gasket on this page is made from copper instead from PTFE or a fibre material. The copper gasket is mainly used on Rancilio espresso machines. The Rancilio part number for this item is 27400001. This copper gasket is from the flat type, so not a copper compression gasket. The outer diameter of this gasket is 24mm, the inner diameter is 21mm and the...

La San Marco shower springReturn to the La San Marco parts overview

Non return valve 3/8M - OUT 3/8M

OR 10.82x1.78mm. Suitable for:CodeProducer400-393-000 Cimbali400393000 Cimbali401-204-000 Cimbali401-362-000 Cimbali401204000 Cimbali401362000 Cimbali402-209-000 Cimbali456051 Elettrobar401134887 Faema402209000 Faema4701134887 Faema07763204 Futurmat-Ariete10063013 LavazzaA-266 Marcfi-Ancas36401002 Rancilio...

Rancilio steam and water tab unit

On this product page you will find a microswitch which can be used on the Faema E61 espresso machines. As well on the Faema E61 Legend espresso machines. The Faema part reference for this switch is Faema 532006600. This switch is rated up to 16A at 250V. This switch has a spring loaded metal pin. This pin get’s pushed inwards when the lever of the group...

La Cimbali Microcimbali liberty sight glass gasket

Copper gasket 20x24x1,5mm

Every La Pavoni Europcciola, La Pavoni Stradivari and La Pavoni Professional is equipped with a boiler safety valve/pressure relief valve. This item can be used with the pre-millenium and the millennium models. With the earliest models when there is no pressure switch this is the main form of pressure relief of the boiler. The Boiler relief valve is...

On this product page you will find a conical PTFE gasket suitable for a variety of La San Marco espresso machines. The La San Marco part reference for this item is 109049  The conical PTFE gasket has a outer diameter of 12,5mm a inner diameter of 7mm and a thickness of 5,5mm. This gasket seals off the Steam and water valve shaft off. This gasket has...

Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180

The item on this page is a water level gasket. This gasket can be used on various Bezzera espresso machines. The Bezzera part reference numbers for this gasket are 5224802 and 5493026. This sight glass gasket has been made from EPDM. The external diameters are 17,4 and 13mm. the internal diameter is 9mm. The height is 9 and 4mm. This gasket has been made...

La San Marco gasket supplementReturn to the La San Marco parts overview

Brass L Fitting 3/8" BSP-G MM Return to our fitting overview

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

Faema Mercurio third series pleixglass third series

Vibiemme infusion valve 41.5mm

Hier is een zeldzame 1 groeps La Cimbali Rubino. Dit model gebruikt de La Cimbali M15 hendel zetgroepen. De volledige machine is uit elkaar gehaald, het frame is gestraald en opnieuw gepoedercoat. Alle verchroomde onderdelen zijn opnieuw verchroomd. De aluminium onderdelen zijn weer opnieuw gepolijst.Daarnaast zijn alle pakkingen en afdichtingen...

La Cimbali Microcimbali liberty piston shaft gasket

Double nipple female 3/8"

La San Marco portafilter double spoutReturn to the portafilter  overview

This pressure switch is the only pressure switch Parker builds for the espresso machine market, brands like Asco (Sirai) and Ma-Ter are a lot more well know for this application. But it doesn’t mean that they can’t be made by someone else. This Parker pressure switch is the model PS325-1C-SX (part numbers 870502 and 870500) is a 3 phase pressure switch...

La San Marco lever pistonReturn to the La San Marco Parts overview

Gaggia piston gasket