Home

Astoria heating element 4500W 230/380V L 310mmType                       flangedwatt 4500volt                      230/400length (mm) 310

The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04  This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...

La Pavoni inox ballReturn to the La Pavoni lever group parts overview

Faema E61 legend non return valveReturn to the Faema E61 Legend water inlet parts overview

On this page you will find the stickers which go on the front panel of the vintage Faema E61 and Faema President lever group. These can get damaged or not present at all. This set contains the Faema water level sticker descriptions, Massimo and Minimo. For the steam valve Vapore, for the water valve Scarico acqua. For the cup warmer valve the Scaldatazze....

La San Marco filterholder gasket 64x53x5,5mmReturn to the  San Marco group parts overview

The water level fitting on this page can be used on various Brasilia espresso machine models. The Brasilia part reference number for this item are 00024.0.00.04 and 00024.0.00.04  This casted brass sight glass fitting has on the machine side a male 3/8” BSP-G thread, on water level side a female 3/8” BSP-G and on the bottom/top a female ¼” BSP-G thread....

Wega bottomless portafilterReturn to the portafilter overview

Conti filterholder gasket 72x57x8,5mmReturn to the Conti lever parts overview

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The most common location for this to seal off the 3/8” male nut on the top of the Faema E61 and E61 style brewing groups like with Bezzera, Brasilia, Grimac, La Scala, Vibiemme and Wega.But also as a gasket to seal off boiler components with brands like Vibiemme and Grimac, This gasket has been made from the material AFM 34 made by the german company...

This item is a vacuum valve for various La Pavoni domestic lever espresso machines. This item is a OEM/Original La Pavoni spare part. The part reference for this item is 396754. This vacuum valve has been made from 2 brass components and a stainless-steel clip. The seal is made with the o ring around the shaft. You can use this vacuum valve on the La...

On this product page you will find a plexiglass for various Faema models such as the Faema E61 and the Faema President lever espresso machine. The dimensions off the cup warming plexiglass for the Faema 2 group are only the measurements of the width and length of the U shape. The length of this plexi is about 455 and the width is 220mm. This plexiglass...

Grimac steam wand

On this product page you will find a brass T fitting, which is solely male. This fitting has on each side a male ½”BSP-G thread. This item is made from casted brass and machined afterwards. It is possible that you receive a item which is brass or nickel plated brass.

This boiler pressure gauge can be found from one of the earliest Faema E61 espresso machines as well for the Faema President lever espresso machines. This pressure manometer has a pressure reach of 0 to 3 bar. The body diameter is 52mm the rim has a diameter of 71mm. At the back is a fitting which is a male 1/8”BSP-G thread. The manometer has been...

Gaggia XD heating element 3 gr 5000/5950W 230V Type flangedwatt 5000/5950volt 220/240length (mm) 400

La San Marco group showerReturn to the La San Marco product overview

On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...

La Cimbali copper gasket. this part is used to seal off the inspection/cleaning plug on the back side of the M15 brewing group.Rreturn to the La Cimbali Parts overview

On this page you will find a retaining ring which is suitable for shaft diameter of 7mm. This Seeger ring is used with a variety of espresso machine brands like Bezzera, San Marco, Spaziale and Rancilio. As mentioned earlier this is a 7mm retaining ring. This ring has a external diameter of 14,3mm and a thickness of 0,9mm. The ring has been made according...

A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The upper o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 58,74mm. This specific o...

Neuert flange pump 150 L/H compact small shaft

Lever spring Stainless steel 46x32x185mm with a cataphoresis coating

Faema E61 legend water level gasket. Return to the Faema E61 Legend sight glass overview

The heating element on this product page is used on various Bezzera espresso machines. The Bezzera part reference numbers for this item are 5722221, 5722246 and 5722423. This heating element produces 3300/3800W at 220/240V.there are in total 4 connecting poles on this heating element. The immersed length is 350mm and the flange has a diameter of 75mm....

Brass nipple 1/4" x 3/8" FF BSP-G Return to our fitting overview

Wega ptfe steam pipe guide

Cimbali inox seeger ringe

The item on this page is a OEM/Original La Pavoni espresso machine part. This boiler knob can be used on various domestic lever espresso machines. This item has the La Pavoni part references 26872 and 47700308  This boiler knob screws in the top of the boiler. This boiler knob does not come with the sealing o ring. The knob has been made in the EU. You...

The item on this page is a OEM/original La Pavoni sight glass nut. This sight glass nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3132034. When you tighten this fitting, the sight glass seal will get firmly around the sight glass and prevents leaking. This part has been made from...

Bezzera lower damper

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 58 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...

The o ring on this product page is used on various Brasilia steam and water valves on various models. The Brasilia part references for this item are 05825.0.00.02 and 0582500002. This o ring is made from EPDM. The cord diameter is 2,62mm and the internal diameter is 25,07mm. This o ring is made in Italy.  You can use this o ring on the Brasilia Century,...

This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 8,5mm. 73x57x8,5mm. This type of brewing group gasket is one of the most standard portafilters around. You will find this on the Faema E61 groups as well as on the E61 style groups used by Vibiemme, La Scala, Bezzera, San Remo, Fiorenzato and Grimac. Of this...