Home

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

La Cimbali teflon holder, keeps the ball bearing on it's right location.Return to the La Cimbali lever parts overview

Faema aluminium drain tray. Return to the Faema E61 valve parts overview

Faema E61 legend water level board

Faema E61 brass upper round rod 40x4mm. screws in the valve gasket holder Return to the Faema E61 group parts overview

The item on this page is a OEM/original La Pavoni sight glass nut. This sight glass nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3132034. When you tighten this fitting, the sight glass seal will get firmly around the sight glass and prevents leaking. This part has been made from...

On this product page you will find a rebuild kit for Faema E61 espresso machines. The Faema E61 brewing group is the basis off all the other E61 style of brewing groups made. This does not mean that this kit will fit all those brewing groups. Manufacturers have made over time a lot of changes in the brewing group assemblies, so they are for some...

Vibiemme boiler manometer 0 - 4. Fitting 1/8" M

On this product page you will find the connection between the lever and the lever group itself. In the top of this casted item you will screw the lever itself.  There are 2 holes. 1 of them has a bushing inside so that there is some axial movement possible. In the fixed hole goes the bearing shaft. In the movable hole goes a pin to make a connection with...

Brass nipple 1/4"M x 3/8"M BSP-G Return to our fitting overview

Gaggia Italcrem ball bearingReturn to the Gaggia Italcrem lever group parts overview

The item on this page is a water level gasket. This gasket can be used on various Bezzera espresso machines. The Bezzera part reference numbers for this gasket are 5224802 and 5493026. This sight glass gasket has been made from EPDM. The external diameters are 17,4 and 13mm. the internal diameter is 9mm. The height is 9 and 4mm. This gasket has been made...

On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...

This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...

For the La Pavoni Europiccola there haven been a variety of boiler fixing rings. It started in the 60ies with the steel boiler rings, from the 1980’s you will find the brass boiler rings. These have 3 m6 bolt holes for installing the heating element, there is also a attachment point for the ground wire. Around the turn of the century La Pavoni introduced...

Faema mercurio third series with high group espresso machine.Fully cleaned and descaled; new safety valve new pressure switch powdercoating of the frame piston gaskets, group gaskets and shower screen replaced. new heat resistant wiring new plexiglass top and back

La Pavoni Europiccola and Professional base plate model 1.This model is suitable for the base with the screw hole in the drain pan base

Faema E61 expansion valve guide. This guide makes sure that the expansion valve gasket stays in it's place Return to the Faema E61 valve parts overview

This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...

On this page you will find a OEM/Original lever group fork made by the Bezzera brand from Italy. This fork is used in various lever brewing group models with the Bezzera brand. The part reference of this item is 5284501.01NC This lever fork is the connection between the piston and lever itself. This part has been made from casted and machined brass. After...

The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...

The heating element on this page is a OEM/original Bezzera spare part. This element can be used on various domestic espresso machines. The Bezzera part references for this heating element are 5722207, 5722240 and 5722240TP  This heating element produces 1250/1450W at 220/240V. The submerges length of the element is 160mm. The flange of this heating...

T fitting 1/4" MFF

Anti vacuum valve TV 1/4". Suitable for:CodeProducerA10220 Astra000634 Aurora-brugnetti7452502 Bezzera05062.4.00.09 Brasilia01.00504 Carimali418-911-002 Cimbali418-911-010 Cimbali418911010 Cimbali408898 ContiC219900560 Ecm00200034 Elektra65000205 Expobar2161-118968 Faema2161118968 Faema418911002 Faema...

Rancilio thermostat 169°C

The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.

Contactor 20A 220V.

Faema E61 boiler 1 group 9LWhen this boiler needs to replace a stainless steel boiler. Some of the pipe work needs to be replaced or remade. It is possible that there are minor dents due to shipping. this is quite common and won't affect the functioning of the boiler.

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.

Wega bottomless portafilterReturn to the portafilter overview

On this product page you can find a XP110 pressure switch suitable for the Elektra Microcasa a Leva and the Isomac models Mondiale, Millennium and Tea. The part references for Elektra are01344035. This pressure switch has been manufactured by the company Ma-Ter. The maximum capacity is 15A at 125/250Vac. The maximum working temperature is 125 degree...

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...

La San Marco steam/water valve rear fitting

The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...

La Cimbali heat exchanger (HX) has a total length of 150mm and a outside diameter of the tube of 42mm.This part is sticks inside the boiler. And it is held in it's place from the boiler side, with a La Cimbali HX ring, then the HX and inbetween the La Cimbali HX and the brewing group there is a o ring to seal it off.Return to the La Cimbali M20 parts...

There we have a fully restored Faema E61 single group vintage espresso machine. The process always starts with stripping down. to the point that there are a ton of body, frame and brewing group parts. Then the frame will be sand blasted and coated with a 2 layer powdercoating. This is also done for the black trim pieces.Then the original chrome plated...