Filter by
Price
€ €
Filter

Faema E61 Jubilé

Faema E61 Jubilee spare parts

The Faema E61 legend and the Faema E61 jubilee are re-introduced around the turn of the century. The design was kept the same, but technically the machine was updated to with modern features. Like replacing the mercury switch with a modern Sirai pressure switch, temperature probe and with the newer machines a internal pump.

With the introduction of the Faema E61 jubilee lifted the traditional machine to a new level. This model is solenoid operated instead of with the manual valves like with the original Faema E61. Which is standard for a modern espresso machine.

In this overview you can find most parts for the Faema E61 legend and Faema E61 jubilee espresso machine. If you can't find the parts your looking for just send a email.

Faema E61 Jubilé spare parts
Portafilter gasket 73x57x9mm Portafilter gasket 73x57x9mm

    Portafilter gasket 73x57x9mm

    Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
    €4.17
    compare
    Quick-view
    Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

      Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

      The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
      €104.03
      compare
      Quick-view
      Anti vacuum valve V.A.R. 1/4" Anti vacuum valve V.A.R. 1/4"

        Anti vacuum valve V.A.R. 1/4"

        On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
        €10.91
        compare
        Quick-view
        Faema E61 steam/water valve gasket holder Faema E61 steam/water valve gasket holder

          Faema E61 steam/water valve gasket holder

          On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...
          €6.84
          compare
          Quick-view
          Faema E61 inox filter 10.5x0.3mm Faema E61 inox filter 10.5x0.3mm

            Faema E61 inox filter 10.5x0.3mm

            On this page you will find a small stainless steel water filter. This filter mesh goes into the top of the Faema E61 brewing groups. This filter membrane prevents clogging up of the nozzle in the group. The Faema part reference for this item is 4771135894.  This wire mesh membrane is made from stainless steel and has a outer diameter of 10,mm and a...
            €1.66
            compare
            Quick-view
            Faema E61 valve gasket 13x4x4mm Faema E61 valve gasket 13x4x4mm

              Faema E61 valve gasket 13x4x4mm

              The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
              €0.74
              compare
              Quick-view
              IMS Faema double cup filterbasket 12/18gr IMS Faema double cup filterbasket 12/18gr

                IMS Faema double cup filterbasket 12/18gr

                A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
                €25.48
                compare
                Quick-view
                Flex pipe 2000mm 3/8 ff conical base Flex pipe 2000mm 3/8 ff conical base

                  Flex pipe 2000mm 3/8 ff conical base

                  On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...
                  €18.50
                  compare
                  Quick-view
                  E61 style groups shower without welding 60mm E61 style groups shower without welding 60mm

                    E61 style groups shower without welding 60mm

                    The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
                    €3.02
                    compare
                    Quick-view
                    Faema E61 steam tap gasket press Faema E61 steam tap gasket press

                      Faema E61 steam tap gasket press

                      This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...
                      €2.32
                      compare
                      Quick-view
                      Faema E61 filterbasket double 12gr Filterbasket double 14gr 70x22mm

                        Faema E61 filterbasket double 12gr

                        Stainless steel double filterbasket for a Faema E61 brewing group. This basket can contain 12grams of coffee. The width of the basket is 70mm and the height of the basket is 22mm.if you are looking for a single filterbasket click there. Return to the Faema E61 group parts overview
                        €6.46
                        compare
                        Quick-view
                        Portafilter gasket 73x57x9mm red silicone Portafilter gasket 73x57x9mm red silicone

                          Portafilter gasket 73x57x9mm red silicone

                          On this product page you will find a portafilter gasket, but not a standard one. This portafilter gasket has been made from food grade silicone, in the colour red.  This product has been made in Italy. The gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 9mm. You can use this on a variety of brands such as the Vibiemme...
                          €4.14
                          compare
                          Quick-view
                          Faema front bakelite knob set Faema front bakelite knob set

                            Faema front bakelite knob set

                            It is quite common that on your old Faema E61 or Faema President the Bakelite body panel screws are missing or are broken. What do these body panel screws do? The back of the machine is slid on the front of the machine. There are 4 threads which go to the front plate of the Faema E61 and Faema President. On those 4 threads you can screw these Bakelite...
                            €36.70
                            compare
                            Quick-view
                            Faema E61 valve rod spring Faema E61 valve rod spring

                              Faema E61 valve rod spring

                              This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
                              €1.13
                              compare
                              Quick-view
                              Faema E61 boiler manometer Faema E61 boiler manometer

                                Faema E61 boiler manometer

                                This boiler pressure gauge can be found from one of the earliest Faema E61 espresso machines as well for the Faema President lever espresso machines. This pressure manometer has a pressure reach of 0 to 3 bar. The body diameter is 52mm the rim has a diameter of 71mm. At the back is a fitting which is a male 1/8”BSP-G thread. The manometer has been...
                                €39.65
                                compare
                                Quick-view
                                Faema E61 gasket PTFE 36.5x30x2mm Faema E61 gasket PTFE 36.5x30x2mm

                                  Faema E61 gasket PTFE 36x30x2mm

                                  The PTFE gasket on this page can be used on various E61 style and Faema E61 brewing groups. You can use this gasket on the E61 style brewing groups of the brands like La Scala, Grimac, Wega and La Pavoni.  The part and model references can be found in the extra info tab. This PTFE gasket has a outer diameter of 36mm a inner diameter of 30mm and a...
                                  €0.94
                                  compare
                                  Quick-view
                                  Faema E61 pump manometer Faema E61 pump manometer

                                    Faema E61 pump manometer

                                    On this product page you will find a pump manometer suitable for the vintage Faema E61 but also for the modern Faema E61 Jubilee and the Faema E61 Legend espresso machines. The part reference for the Faema E61 Legend and Jubilee is 3781135801  This pressure gauge has a scale which goes from 0 – 16 bar of pressure. The body has a outer diameter of 52mm and...
                                    €22.16
                                    compare
                                    Quick-view
                                    3 phase safety thermostat 169-18° 3 phase safety thermostat 169-18°

                                      3 phase safety thermostat 169-18°

                                      3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...
                                      €60.70
                                      compare
                                      Quick-view
                                      Faema E61 steam/water group expanding spring Faema E61 steam/water group expanding spring

                                        Faema E61 steam/water group expanding spring

                                        The compression spring on this page is used in a variety of Faema espresso machines. What is the function of this spring? This spring is a steam and water valve spring in the iconic E61 style of steam and water valves. This spring holds the valve closed. The Faema part reference for this compression spring is 4731135884. The steam and water valve...
                                        €2.25
                                        compare
                                        Quick-view
                                        Faema E61 steam tube Faema E61 steam tube

                                          Faema E61 steam tube

                                          The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
                                          €31.81
                                          compare
                                          Quick-view
                                          Faema E61 plastic top 1 group Faema E61 plastic top 1 group

                                            Faema E61 plastic top 1 group

                                            On this product page you will find a plexiglass for various Faema models such as the Faema E61 and the Faema President lever espresso machine. The dimensions off the cup warming plexiglass for the Faema 1 group are only the measurements of the width and length of the U shape. The length of this plexi is about 300mm and the width is 220mm. This plexiglass...
                                            €241.52
                                            compare
                                            Quick-view
                                            Faema E61 glass plate srew set Faema E61 glass plate srew set

                                              Faema E61 glass plate srew set

                                              Every Faema E61 and Faema President has a glass plate at the back of the espresso machine. This glass plate is held in place with a set of 4 glass plate screws. On this page you can find a set of 4 aluminium screws which look like the original screws used for holding the glass in its place. Don’t overtighten them, it’s only there that the glass doesn’t...
                                              €49.92
                                              compare
                                              Quick-view
                                              Faema E61 complete upper pipe Faema E61 complete upper pipe

                                                Faema E61 complete upper pipe

                                                On this product page you will find the complete upper pipe for various E61 style and Faema E61 brewing groups. This item can be used in various E61 style brewing groups such as the ones used on the La Pavoni, Isomac and EC Heidelberg. But also on the Faema E61, Faema E61 Legend and the Faema E61 Jubilee espresso machines. The Faema part reference is...
                                                €30.34
                                                compare
                                                Quick-view