Faema E61 legend charging valve
Faema E61 legend charging valveReturn to the Faema E61 Legend water inlet parts overview
€13.71
0
My cart
Faema E61 Jubilé
IMS E61 style shower screen
This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
€22.75
Faema E61 boiler manometer
This boiler pressure gauge can be found from one of the earliest Faema E61 espresso machines as well for the Faema President lever espresso machines. This pressure manometer has a pressure reach of 0 to 3 bar. The body diameter is 52mm the rim has a diameter of 71mm. At the back is a fitting which is a male 1/8”BSP-G thread. The manometer has been...
€39.65
Flex pipe 1500mm 3/8 FF conical base
The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.
€17.11
Faema E61 Net holder washer 9.8x6.3x1mm
On this page you will find a brass washer which is used in the E61 brewing groups made by Faema. The part references for this item can be found back in the extra info tab. The gasket is used on top of the stainless-steel nozzle filter. The nozzle spring is pushing against this washer to get a equal amount of pressure against the filter This brass washer...
€1.20
Faema heating element 2/3 group 4500W 230/380V
Faema heating element 2/3 group 4500W 230/380V.Type flangedwatt 4500volt 230/380length (mm) 380Suitable for:CodeProducer17101 Astoria CMA3541135078 Faema911545000 Faema911545010 Faema17104 Wega
€102.36
O-ring 17,17X1,78mm EPDM
O-ring 17,17X1,78mm EPDMReturn to the Faema E61 Legend water inlet parts overview
€2.26
O ring 3.69x1.78mm viton
O ring 3.69x1.78mm vitonReturn to the Faema E61 Legend water inlet parts overview
€0.52
Faema E61 steam tube
The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
€31.81
Faema e61 Legend o ring level glass 67x60x3.5mm
Faema e61 Legend o ring level glass 67x60x3.5mmReturn to the Faema E61 Legend sight glass overview
€4.28
Faema glass support set
It is quite common that the supports of your glass at the back are rusted and the bolts are stuck. We have made a new set of support sets for the glass plates from stainless steel. This support set can be used on all the Faema e61Faema President lever espresso machines which use the glass plate. But also on the late models Urania which use the glass...
€45.30
Safety valve 3/8" 2.0 bar CE PED IV certified
On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.47
Stainless ball 8mm
The stainless steel ball on this page has a diameter of 8mm. you can use this stainless steel ball in various applications. They are used in the Faema Zodiac Lever groups in the flow regulator.But the stainless steel ball bearing can also be used in the steam and water valves with the Vibiemme model like the Replica. In this valve it seals off the boiler...
€2.37
Faema E61 valve rod spring
This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
€1.13
Portafilter gasket 73x57x9mm
Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...
€4.17
Faema non return valve plastic holder
Faema non return valve plastic holderReturn to the Faema E61 Legend water inlet parts overview
€3.30
Faema E61 legend jubilee portafilter double
On this product page you will find a double portafilter which is suitable for the Faema E61 Legend and the Faema E61 Jubilé espresso machines. The part reference number for this item is 2771-135 803.The portafilter has 2 ears oriented at 90 degree. The ears have a thickness of 6,3mm. The spout connection on this portafilter is a 3/8” BSP-G thread. This...
€90.92