The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R  The portafilter is a...

On this page for Bezzera Strega parts you will find a wired microswitch. This microswitch is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5963110.01. This item is only suitable for the Tank Top version.

On this page you will find a rubber back stop used with a variety of and newer lever espresso machine brewing groups. You will find this back stop on Astoria and Wega models pre 2001. Currently you can find them on brewing groups used by Bezzera 5473001 , Pavoni 477020, Victoria Arduino 17000018, Wega WY15101 and Brasilia 01431.0.00.02. For Pavoni groups,...

Faema Mercurio stainless steel heating element set. special order item 2 - 3 weeks

If you are rebuilding your Faema e61 with a new boiler it might be handy to order this boiler fitting along with it. Seen the new boiler isn’t supplied with this fitting. This brass casted and machined fitting has on 2 sides a male ½”BSP-G thread. So to screw it on one side in the HX on the boiler and for the other side to the brewing group. This item has...

The sight glass on this page is used on a variety of Lever espresso machines by the brand Faema. This sight glass can be used on models such as the Faema E61, Faema President and the Faema Lambro espresso machine. The sight glass has a outer diameter of 12mm and a overall length of 175mm. This sight glass has been made in Italy. The gasket you need for...

This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...

The item on this page is a OEM/Original La Pavoni spare part. This item is the lever of the lever brewing group. This item is compatible with a lot of pre-millennium as well as millennium brewing groups. This lever can be used on various domestic La Pavoni and Gaggia lever espresso machines. The La Pavoni part reference for this item is 3954004 and for...

Valve assembly for steam valve

La Pavoni showerReturn to the La Pavoni Bar modern parts overview

PTFE tap joint gasket 14.5x10.5x4.5mm

The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04  This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...

The gasket on this page is used on various water inlet valves with the brand La Cimbali. The Cimbali part reference number for this item is 401281000 and 401-281-000. The flat gasket has been made from PTFE. The outer diameter is 11,4mm the inner diameter is 8mm and the thickness is 3mm. this gasket has been made in Italy. You can use this gasket on the...

Faema marte/mercurio upper group gasket. and how do you need to replace the old one with a new:Unscrew the 4 bolts on top of the group; pull the group assembly out of the brewing group; if you look inside the inner ring has a gasket, remove the old gasket and replace it with the new one; do the above things the other way aroundReturn to the Faema...

On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.

Conti Empress steam and water valve flat gasket

The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of  Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of UNI 5587 and...

This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This pump is a clamp ring motor. So the...

Rancilio thermostat 169°C

Faema la cimbali water inlet spring

O ring EPDM 23x3mm. This o ring seals off one side of the one way valve. Return to the Faema E61 valve parts overview

O ring 18,72X2,62 nbr

The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.

Suitable for the new Faema E61 Legend and Jubilee

On each side of the aluminium casting used on the Faema Lambro, Faema President and the Faema Urania you will a pressed bracket. These brackets guide the bearings over the flattened-out surface on this bracket. The article listed on this page is for the left side of the group. To be sure that you order the correct side. The rounded where the rounded off...

Arrarex Caravel 2.1 - 3.2 gasket set

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...

The item on this product page is a steam and water valve elastic washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item 01286.0.00.03  These washers are used in a pair in combination with the articulating valve screw, which is used on the steam and water valves. You can use these washers on the Brasilia...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

In the Faema E61 and E61 style brewing groups you can find a variety of square valve pins, in different shapes and heights. This square pin screws into the M3 thread situation on the valve gasket holder. This model is one of the more common model which is used with brands such as Wega, Faema and La Pavoni. The part references are for Wega WY27421012,...

Switch protective cover

Brass nut 3/8" BSP-G for 10 mm welding capReturn the nut overview page

La Pavoni heating element gasket. 67x67 mm, int. hole dia 40mm, 3 holes

La San Marco steam/water valve spring driving bowl

Some heating elements have a triangular flange, these are used for some models of Vibiemme, Brasilia and Aurora Brugnetti. This heating element gasket is made from the fibre material AFM34 by Victor Reinz in Germany. This specific element has the outer dimensions of 80x80mm and a thickness of 2mm and is made from a fibre material. If you are not sure if...

La Pavoni copper gasketReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview