Stainless steel steam pipe complete

Astoria Wega heating element 1 gr 2000W 230VType flangedwatt 2000volt 230length (mm) 180

Faema guide ring Return to the Faema Zodiac lever parts overview

O-ring  17,17X1,78mm EPDMReturn to the Faema E61 Legend water inlet parts overview

This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...

The item on this page is a Gaggia lever brewing group spring guide, this item can be found on the Gaggia C70/C80 brewing groups. The spring guide, keeps the main compression spring centred, has been made from pressed copper. Limited stock available

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

The water level fitting on this page can be used on various Brasilia espresso machine models. The Brasilia part reference number for this item are 00024.0.00.04 and 00024.0.00.04  This casted brass sight glass fitting has on the machine side a male 3/8” BSP-G thread, on water level side a female 3/8” BSP-G and on the bottom/top a female ¼” BSP-G thread....

La San Marco silicone level gasket 19x31x3mm

The single filterbasket model shown on this page is mainly used on Astoria and Wega espresso machines. Note: this basket can be used on any portafilter which has a similar 70mm outer diameter filterbasket. This single coffee filterbasket has been made by the Italian filterbasket manufacturer IMS Filtri, their reference number for this item is CM1T007....

This pressure switch is the only pressure switch Parker builds for the espresso machine market, brands like Asco (Sirai) and Ma-Ter are a lot more well know for this application. But it doesn’t mean that they can’t be made by someone else. This Parker pressure switch is the model PS325-1C-SX (part numbers 870502 and 870500) is a 3 phase pressure switch...

La Pavoni sight glass 106x12mm red line

Brass half nut 3/8" BSP-G  Return to our fitting overview

Victoria Arduino supervat portafilter insert screw. This screw will fit a original Victoria Arduino supervat thread. Return to the Victoria Arduino lever parts overview

The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R  The portafilter is a...

When you replace gaskets in your espresso machine it might be handy that you use some kind of lubricant to lubricate your o rings or rubber like gaskets. But you don’t replace gaskets that often, then the need for a big tube of silicone grease is not a necessity. In this case we have a small, closable, tube of silicone grease. This tube contains 6 grams...

La Cimbali copper gasket. this part is used to seal off the inspection/cleaning plug on the back side of the M15 brewing group.Rreturn to the La Cimbali Parts overview

On this page you will find a complete rebuild set for the La Cimbali Microcimbali / La Cimbali Liberty. This espresso machine is the only domestic lever espresso machine build by the company La Cimbali. Nowadays there are barely any nos or newly produced part available for this espresso machine. On this product page you can find a complete general gasket...

valve rod washer 22.15x13x1.2. Suitable for:CodeProducer590-715-000 Cimbali590715000 Faema

Boiler safety thermostat 130°C. 16A 250V

Ball valve 1/4M 1/4F

The stainless steel ball on this page has a diameter of 8mm. you can use this stainless steel ball in various applications. They are used in the Faema Zodiac Lever groups in the flow regulator.But the stainless steel ball bearing can also be used in the steam and water valves with the Vibiemme model like the Replica. In this valve it seals off the boiler...

La San Marco lever group right screwReturn to the  San Marco group parts overview

Rancilio water/steam tap

Gaggia italia gasket and shim set. This set contains 4 inox shims and 4 v piston seals

La Cimbali teflon holder, keeps the ball bearing on it's right location.Return to the La Cimbali lever parts overview

It is quite common that the rubber feet of your Faema E61, Faema President, Faema E61 Legend or Faema E61 Jubile will break down. This can be due to age, cracking or just moving around. These rubber feet go in the bottom of the aluminium feet used on all these models, the modern adjustable feet have the part reference of 3515-135 857 and the fixed feet at...

It is quite common that the heating element on the 1 group Gaggia America is broken. Finding the correct heating element for this espresso machine is quite difficult. Seen the espresso machine does have quite a shallow boiler, so a lot of elements won´t fit. This specific model does fit and produces 1200W at 230V. you can also upgrade your single group...

Connecting wire per 5m brown. made from silicone and fiberglass. copper wire.Section of wire 2,5mm2 (13AWG)

The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....

O ring 23,52x1.78mm epdmReturn to the Faema E61 Legend water inlet parts overview

Astoria Wega tap gasket 13.8x6x4.6mm

The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines.  For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02  This copper gasket has a outer diameter of 23mm a inner diameter of 17mm and a...

La Cimbali Microcimbali membrane

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

Lever ball bearing set for Faema Marte and Mercurio lever groups, only the early curved ones. For the later models Faema Mercurio you need to have a bigger bearing. click there.