IMS La San Marco 3 coffee filterbasket. This basket can contain 18/20grams of coffee.The filterbasket hole size is 0,3mmReturn to the IMS filterbasket overview page

La San Marco filterholder gasket 64x53x5,5mmReturn to the  San Marco group parts overview

IMS cimbali 2 coffee filterbasket. The basket can contain 12/18grams of coffee.The hole diameter of the baskets is 0,3mm.Return to the IMS filterbasket overview page

On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...

Boiler injector and fitting 1/4" M-M with 90° L=140MM Suitable for BFC, Grimac, La Scala Vibiemme

La San Marco gasket 39,5x50x5,5mmReturn to the  San Marco group parts overview

The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...

Return to the Faema E61 valve parts overview

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab. This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac. You can find this level regulator on various espresso...

On this product page you can find the pre-millennium single filterbasket for the La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. This filterbasket has a outer diameter of 58mm and a height of 22mm. This filterbasket can hold around 6 grams of ground...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 58 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are...

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or X gasket. The X gasket is in almost all the cases the lower piston gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 50mm, the inner diameter is 38mm and...

On this product page you will find the portafilter gasket for the Bezzera Strega. This portafilter gasket is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 7493020 This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 7,5mm.

On this product page you will find a brass washer. This brass washer is used in the iconic steam and water valve used on the Faema E61 espresso machines. This washer prevents that the shaft gaskets are being destroyed with the threads on the valve shaft. The Faema part reference for this part is 4051050569  This brass flat washer has a outer diameter of...

On this page you will find a lever brewing group main spring. This spring is used to generate the pressure. This type of spring is quite common and will find it in a variety of lever espresso machines. This model has a overall length of 140mm and a outer diameter of 46mm. this spring has been made from standard spring steel and after that it got...

This sight glass fitting is used on a variety of espresso machine brands such as Vibiemme, La Scala, Brasilia and Gaggia. The Brasilia part reference is 00089.0.10.04 , the Gaggia reference is LV0505 and the Vibiemme (VBM) part references are RACCP227 and RACCP427. This sight glass fitting has a male 3/8” BSP-G thread. The central hole is for the sight...

Faema E61 double portafilter for E61 type group

With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...

One of the most universal items. The male brass plug. The plus on this page can be found in the catalogue of a variety of espresso machine manufacturers like Astoria, Faema, La Spaziale and Wega. This specific plug has a male ¼”BSP-G thread. The height of this plug is 13 mm and the wrench size for this plug is 17mm.

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

IMS filter basket removal tool

A set of 2 our own custom made laser cut double filter baskets for the arrarex caravelBasket 1: capacity 14 gr Hole dia: 0,25mmBasket 2: capacity 14 gr Hole dia: 0,30 mmWhat is the difference between a laser cut hole diameter of 0,25mm and 0,3 mm?We choose to make two hole diameters, because the flavor of the espresso completely changes. But using the...

T fitting 1/4" MFF

Faema E61 spout breaker Return to the Faema E61 group parts overview

On this product page you will find a T fitting. This T fitting has on each side a female connection. The threads used are 1/8” BSP-G thread. The fitting is made from casted and machined brass in Italy. It is possible that you get a plain brass item or a nickel plated one. For functioning that doesn’t matter.

Rancilio brass washer

T fitting 1/4" MMM

Spring for steam valve

Piston gasket V shape 52x37x7.5mm

On this product page you will find a fibre gasket used on the Faema Zodiac lever brewing group. This gasket seals off the flow regulator on multiple locations. This fibre gasket has a outer diameter of 22mm a inner diameter of 17mm and a thickness of 2 mm. this item has been made in Italy. You can use this gasket on the flow regulators used on the later...

The item on this product page is a steam and water valve elastic washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item 01286.0.00.03  These washers are used in a pair in combination with the articulating valve screw, which is used on the steam and water valves. You can use these washers on the Brasilia...

La San Marco lever group right screwReturn to the  San Marco group parts overview

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

On this product page you will find a heating element which is really well suited to be installed in a Faema E61 2 group boiler. It runs on single phase and still gives enough power to power a 2 group E61. This heating element produces 2440/2900W at 220/240V the element has 4 wiring poles. In the middle of the heating element is also space for a heating...

The heating element on this page is suitable to use on the La San Marco 85 Leva lever espresso machine. The San Marco part reference for this heating element is 108461. This element produces 3000W at 230V. There are in total 4 connecting poles. The immersed length of this element is 375mm. The flange is 82x82mm. This element is mainly for 2 group espresso...

This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...