For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one.  On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...

O ring 15,88x2,62mm viton

Parker 3 way solenoid valve 220/230V 50/60Hz conical ruby 0-10bar. Suitable for:Code Producer18151 Astoria CMA18153 Astoria CMA18157 Astoria CMA18161 Astoria CMA18161996 Astoria CMA18162 Astoria CMA18162002 Astoria CMAA10111 Astra000191 Aurora-brugnetti7702204 Bezzera7702211 Bezzera01947.4.00.08 Brasilia...

Switch protective cover

Gaggia filterholder springReturn to the Gaggia Italia lever group parts overview

On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...

Lever group attachment screw

Rancilio steam and water tab unit

Astoria Wega dichtung dampf/wasserhahn

Faema la cimbali water inlet spring

Hardened stainless steel insert

The nut on this product page is a weld-end cap nut. This nut is used to install the pipe with the welded end cap on another fitting. This brass nut is used in combination with a welding accessory. The thread inside is a 3/8” BSP-G female thread. The height of the nut is 16mm and the center hole of this nut is 12.5mm. This brass weld nut can be used in...

On this product page you will find the injector tube for various lever espresso machine groups. For example used on Astoria, Wega and La Pavoni groups. This item is a OEM/original Astoria/Wega spare part, but can be used with La Pavoni brewing groups. The overall length of this tube is 140mm and the tube has a outer diameter of 12mm. the fittings screws...

La Pavoni Professional boiler gasket. Goes inbetween the boiler and base.Also suitable to use on the bottom for the bakelite flange.

The shower screen on this product page is quite unique. This is a Conti lever espresso machine shower screen. This shower screen has 3 bolt holes instead of the traditional 1 bolt hole. This shower screen has the part reference of 072200  This stainless-steel shower screen has in total 3 mounting holes. The outer diameter of this shower screen is 57mm....

Grimac steam wand

Gaggia XD heating element 2 gr 4000/4760W 230VType flangedwatt 4000/4760volt 220/240length (mm) 310

PTFE gasket 20x17x2mm. Suitable for:CodeProducer12010 Astoria CMA000466 Aurora-brugnetti000501 Aurora-brugnetti400-215-000 Cimbali400215000 Cimbali401-183-000 Cimbali401-183-010 CimbaliC469900420 Ecm401183000 Faema401183010 Faema4701024558 Faema01539006 Futurmat-Ariete05132808 Futurmat-ArieteISGUATF22172 Isomac...

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...

Faema guide ring Return to the Faema Zodiac lever parts overview

Gaggia group shower dia 49mm

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...

La San Marco valve body

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

Faema zodiac circulation limiter

Double nipple female 3/8"

Faema ring  Return to the Faema Zodiac lever parts overview

Astoria portafilter gasket 67x56x5.5mm original

Safety valve 1/2"1,8 Certif CE PED IV

O ring epdm 4x2mm

IMS filter basket removal tool

Faema E61 brass non return valve body. The side flange is screwed into the main body.If you want to complete the assembly add the following parts to the part:Faema E61 Spring Non Return Valve; O Ring EPDM 8,9x1,9mm; Faema E61 Small Non Return ValveReturn to the Faema E61 valve parts overview

Brass L Fitting 3/8" BSP-G MM Return to our fitting overview

O-ring  17,17X1,78mm EPDMReturn to the Faema E61 Legend water inlet parts overview

The piston gasket on this page is used on various Conti lever brewing groups. The Conti part reference for this item is 200510.  This piston gasket has been made from NBR. The outer diameter is 61mm, the inner diameter is 47mm and the thickness is 6,3mm. This item has been made in France. You can use this piston gasket on the CC100 PM lever brewing...