Gaggia filterholder gasket 73,5x57,5x8,5mm
Gaggia filterholder gasket 73,5x57,5x8,5mmReturn to the Gaggia Italia lever group parts overview
€2.89
0
My cart
Gaggia lever spare parts
La Pavoni Europiccola lever roller
This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...
€6.38
La Pavoni Europiccola inlet pipe
On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...
€20.64
La Pavoni Europiccola complete group piston
La Pavoni Europiccola complete group pistonReturn to the Pavoni Europiccola group parts overview
€77.05
Gaggia America sight glass gasket
The item on this page is a sight glass gasket which can be used on various older Gaggia espresso machine models. The sight glass on the Gaggia America has 2 seals, a inner and a outer seal. You can use this gasket for both applications. This gasket is made from EPDM in the Czech Republic.
€8.37
Gaggia group locking gasket
Gaggia group locking gasket FDA gradedReturn to the Gaggia Italia group overview
€12.12
La Pavoni Europiccola pressure switch
The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
€18.92
La Pavoni Europiccola chrome stuffing nut
The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...
€7.06
Filterholder gasket 72.5x57x8 mm
On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
€3.67
La Pavoni Europiccola 12X17X1mm washer
The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003 and for Gaggia the reference is S313003 This washer is suitable for Pre-millennium as well for Millennium espresso machines....
€5.12
Gaggia camme guide
This cam guide is vital in the lever mechanism used on the old Gaggia lever brewing groups. This cam guide is installed inside the side of the brewing group. The lever cams do slide over this shaft. This item is not in production anymore.
€10.99
La Pavoni Europiccola millenium portafilter
The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R The portafilter is a...
€52.79
La Pavoni Europiccola lever pin
The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...
€6.38
Gaggia flat rubber gasket
This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
€4.18
Gaggia top nut
This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.
€8.75
La Pavoni Europiccola piston shaft
The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...
€39.80
La Pavoni Europiccola brass washer
The item on this product page is a brass washer which can be used on various domestic La Pavoni and Gaggia Lever espresso machines. This includes pre-millennium and Millennium brewing group models. This washer is used in the steam valve. This washer spreads the force equally over the shaft gasket. There are 2 washers installed in each valve. The Gaggia...
€4.16
Gaggia rubber ring
This rubber o ring is used on the Gaggia brewing groups C70/C80 and is used on the flange side of the brewing group. This o ring is made from EPDM and has a cord diameter of 1,78mm and a internal diameter of 25,12mm. This o ring is made in Italy.
€1.90
Lever V piston gasket 51x38x7.5mm
On this page you will find a piston gasket suitable for multiple espresso machine models. You can find this piston gasket on Rancilio, Faema and Aurora Brugnetti Lever groups. The outer diameter of this piston gasket is 51mm, the inner diameter is 38mm and the thickness of the gasket is 7,5mm. On Rancilio espresso machines you can use them on the Rancilio...
€3.60
Gaggia filterbasket 1 coffee 7gr 68x24.5mm
The single filterbasket on this page can be used on a variety of Gaggia espresso machines. This filter basket is manufactured by the Italian company IMS filtri with the reference of GA1T182. This 1 coffee filterbasket can hold about 7 grams of ground coffee. The outer diameter of this filter basket is 68mm and the height is 24,5mm. The hole pattern is in...
€5.69
La Pavoni Europiccola heating element gasket silicone
On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
€4.03
La Pavoni Europiccola shaft gasket
The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....
€7.68
La Pavoni Europiccola boiler cap o ring
This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...
€1.09
Gaggia lever group pinion gear
It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
€100.96
Gaggia steel ball spring
This compression spring is vital in the lever mechanism used on the old Gaggia lever brewing groups. This spring is installed inside the side of the brewing group, with a small ball bearing on top of it. If this item is missing in your brewing group your brewing group mechanism won’t function properly. This compression spring is unfortunately out of...
€11.62
Gaggia filterholder spring
Gaggia filterholder springReturn to the Gaggia Italia lever group parts overview
€1.01
La Pavoni Europiccola group piston
The item on this page is a brass piston for La Pavoni and Gaggia lever espresso machine groups. This piston can be used on pre-millennium and millennium brewing groups. In the period between approx. 1996 and 2006 the pistons were made from Teflon. This idea was discontinued after 2006 and they got back to the brass pistons again. The Gaggia part reference...
€55.37
La Pavoni Europiccola manometer fitting and sight glass holder gasket
The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021. This...
€1.56
Gaggia Italcrem gasket
Gaggia Italcrem gasketReturn to the Gaggia Italcrem lever group parts overview
€1.10
Gaggia Italcrem ball bearing
Gaggia Italcrem ball bearingReturn to the Gaggia Italcrem lever group parts overview
€8.75
La Pavoni Europiccola perforated washer
On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...
€4.71
Gaggia piston shaft
The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.
€174.30
Gaggia spring guide
The item on this page is a Gaggia lever brewing group spring guide, this item can be found on the Gaggia C70/C80 brewing groups. The spring guide, keeps the main compression spring centred, has been made from pressed copper. Limited stock available
€3.34
The Origins of Gaggia
The history of the lever espresso machine begins with Gaggia, a company founded in 1948 by Achille Gaggia. Before establishing the company, Gaggia himself patented the first piston-driven lever brewing group, laying the foundation for the modern espresso machine. In 1948, Gaggia officially founded the company, setting the stage for a revolution in coffee brewing technology.
The Gaggia Lever Espresso Machines
Gaggia's first production model lever espresso machine was the Gaggia Classica, introduced in the early years of the company's history. This was followed by a series of commercial espresso machine models, including the Gaggia Esportazione, Gaggia TS, Gaggia Spagna, Gaggia Internazionale, and the iconic Gaggia America in the late 1950s. In the 1960s, Gaggia continued to innovate with models like the Gaggia Orione, each one building upon the success of its predecessors.
Gaggia's Contribution to Home Espresso Brewing
In addition to their commercial espresso machines, Gaggia also developed the first lever espresso machine for domestic use in the early 1950s – the Gaggia Gila. This groundbreaking machine brought the art of espresso brewing into the homes of coffee enthusiasts around the world, paving the way for the modern home espresso movement.
The Evolution of Gaggia's Lever Group
Throughout the years, Gaggia's lever group espresso machines underwent several technical advancements and refinements, but the fundamental principle remained the same. The lever group, with its piston-driven mechanism, offered a unique and authentic espresso brewing experience that was cherished by baristas and coffee aficionados alike.
Gaggia Today: A Legacy Continued
While Gaggia continues to produce commercial and domestic espresso machines today, the production of lever espresso machines has been discontinued. However, the legacy of Gaggia's lever group machines lives on, inspiring a new generation of coffee enthusiasts and serving as a reminder of the company's enduring commitment to quality and innovation.
Gaggia Lever Group Spare Parts
If you're the proud owner of a Gaggia lever espresso machine and in need of spare parts, you've come to the right place. At [Your Company Name], we offer a comprehensive selection of Gaggia lever group spare parts, including piston gaskets, springs, portafilter handles, and more. With our genuine replacement parts, you can keep your Gaggia espresso machine running smoothly for years to come.
Conclusion: Celebrating Gaggia's Legacy
In conclusion, Gaggia's contribution to the world of coffee cannot be overstated. From pioneering the lever espresso machine to revolutionizing home espresso brewing, Gaggia has left an indelible mark on the industry. As we celebrate Gaggia's legacy, we invite you to explore our selection of Gaggia lever group spare parts and continue the tradition of exceptional espresso brewing for generations to come.