Filter by
Price
€ €
Filter

Faema E61 Jubilé

Faema E61 Jubilee spare parts

The Faema E61 legend and the Faema E61 jubilee are re-introduced around the turn of the century. The design was kept the same, but technically the machine was updated to with modern features. Like replacing the mercury switch with a modern Sirai pressure switch, temperature probe and with the newer machines a internal pump.

With the introduction of the Faema E61 jubilee lifted the traditional machine to a new level. This model is solenoid operated instead of with the manual valves like with the original Faema E61. Which is standard for a modern espresso machine.

In this overview you can find most parts for the Faema E61 legend and Faema E61 jubilee espresso machine. If you can't find the parts your looking for just send a email.

Faema E61 Jubilé spare parts
Safety valve 3/8" 2.0 bar CE PED IV certified Safety valve 3/8" 2.0 bar CE PED IV certified

    Safety valve 3/8" 2.0 bar CE PED IV certified

    On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
    €10.47
    compare
    Quick-view
    Faema E61 valve gasket 13x4x4mm Faema E61 valve gasket 13x4x4mm

      Faema E61 valve gasket 13x4x4mm

      The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
      €0.74
      compare
      Quick-view
      Faema front bakelite knob set Faema front bakelite knob set

        Faema front bakelite knob set

        It is quite common that on your old Faema E61 or Faema President the Bakelite body panel screws are missing or are broken. What do these body panel screws do? The back of the machine is slid on the front of the machine. There are 4 threads which go to the front plate of the Faema E61 and Faema President. On those 4 threads you can screw these Bakelite...
        €36.70
        compare
        Quick-view
        Faema E61 filterbasket single 7gr Faema E61 filterbasket single 7gr

          Faema E61 filterbasket single 7gr

          Stainless steel single filterbasket suitable for a Faema E61 brewing group. The basket can contain 7grams of coffe. The outside diameter is 69,5mm and the height of the basket is 24mm.If you are looking for a double filterbasket click there. Return to the Faema E61 group parts overview
          €5.26
          compare
          Quick-view
          Faema E61 legend jubilee portafilter single Faema E61 legend jubilee portafilter single

            Faema E61 legend jubilee portafilter single

            On this product page you will find a single portafilter which is suitable for the Faema E61 Legend and the Faema E61 Jubilé espresso machines.. The part reference number for this item is 2771-135 804. The portafilter has 2 ears oriented at 90 degree. The ears have a thickness of 6,3mm. The spout connection on this portafilter is a 3/8” BSP-G thread. This...
            €77.86
            compare
            Quick-view
            Stainless ball 8mm Stainless ball 8mm

              Stainless ball 8mm

              The stainless steel ball on this page has a diameter of 8mm. you can use this stainless steel ball in various applications. They are used in the Faema Zodiac Lever groups in the flow regulator.But the stainless steel ball bearing can also be used in the steam and water valves with the Vibiemme model like the Replica. In this valve it seals off the boiler...
              €2.37
              compare
              Quick-view
              Brewing group gigleur 0.6mm Brewing group gigleur 0.6mm

                Brewing group gigleur 0.6mm

                Faema E61 brass brewing group gigleur 0.6mm. this is also suitable for most of the E61 style brewing groups and a variety of modern commercial espresso machines  Return to the Faema E61 group parts overview
                €1.58
                compare
                Quick-view
                Faema e61 rubber foots 25x6mm Faema e61 rubber foots 25x6mm

                  Faema e61 rubber foots 25x6mm

                  It is quite common that the rubber feet of your Faema E61, Faema President, Faema E61 Legend or Faema E61 Jubile will break down. This can be due to age, cracking or just moving around. These rubber feet go in the bottom of the aluminium feet used on all these models, the modern adjustable feet have the part reference of 3515-135 857 and the fixed feet at...
                  €4.16
                  compare
                  Quick-view
                  Faema E61 Net holder washer 9.8x6.3x1mm Faema E61 Net holder washer 9.8x6.3x1mm

                    Faema E61 Net holder washer 9.8x6.3x1mm

                    On this page you will find a brass washer which is used in the E61 brewing groups made by Faema. The part references for this item can be found back in the extra info tab. The gasket is used on top of the stainless-steel nozzle filter. The nozzle spring is pushing against this washer to get a equal amount of pressure against the filter This brass washer...
                    €1.20
                    compare
                    Quick-view
                    Faema E61 inox filter 10.5x0.3mm Faema E61 inox filter 10.5x0.3mm

                      Faema E61 inox filter 10.5x0.3mm

                      On this page you will find a small stainless steel water filter. This filter mesh goes into the top of the Faema E61 brewing groups. This filter membrane prevents clogging up of the nozzle in the group. The Faema part reference for this item is 4771135894.  This wire mesh membrane is made from stainless steel and has a outer diameter of 10,mm and a...
                      €1.66
                      compare
                      Quick-view
                      IMS E61 style shower screen IMS E61 style shower screen

                        IMS E61 style shower screen

                        This shower screen style is one of the most used shower screens with espresso machines. It can be for instance used on the Faema E61 and E61 style brewing groups. This specific model of shower screen is made by IMS Filtri in Italy. But this is not a standard version, it is from their Competition series shower screens. This specific model is the E61200IM....
                        €22.75
                        compare
                        Quick-view
                        Filterholder gasket 72.5x57x8 mm Filterholder gasket 72.5x57x8 mm

                          Filterholder gasket 72.5x57x8 mm

                          On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
                          €3.67
                          compare
                          Quick-view
                          IMS Faema double cup filterbasket 12/18gr IMS Faema double cup filterbasket 12/18gr

                            IMS Faema double cup filterbasket 12/18gr

                            A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
                            €25.48
                            compare
                            Quick-view
                            Level indicator red ball Level indicator red ball

                              Level indicator red ball

                              This red ball is a level indicator ball. This ball floats inside the water level tube. Seen it’s not always easy to see the water level makes a floating red ball it a lot easier. There are more colours available with different diameter of balls. This red ball has a diameter of 5,8mm and is made in Italy. This type of level indicator can be found in a...
                              €2.18
                              compare
                              Quick-view
                              Faema E61 glass plate srew set Faema E61 glass plate srew set

                                Faema E61 glass plate srew set

                                Every Faema E61 and Faema President has a glass plate at the back of the espresso machine. This glass plate is held in place with a set of 4 glass plate screws. On this page you can find a set of 4 aluminium screws which look like the original screws used for holding the glass in its place. Don’t overtighten them, it’s only there that the glass doesn’t...
                                €49.92
                                compare
                                Quick-view
                                Faema E61 valve rod spring Faema E61 valve rod spring

                                  Faema E61 valve rod spring

                                  This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
                                  €1.13
                                  compare
                                  Quick-view
                                  Faema E61 gigleur spring Faema E61 gigleur spring

                                    Faema E61 gigleur spring

                                    Faema E61 stainless steel gigleur spring. if your replacing this part don't forget to replace the rest of the sealing parts of the group. We offer a handy rebuilding kit for that. (the gigleur spring is also in that kit) Return to the Faema E61 group parts overview
                                    €1.60
                                    compare
                                    Quick-view
                                    Faema E61 legend pump motor Faema E61 legend pump motor

                                      Faema E61 legend pump motor

                                      Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
                                      €260.91
                                      compare
                                      Quick-view
                                      Faema E61 group upper plug Faema E61 group upper plug

                                        Faema E61 group upper plug

                                        The fitting on this page is the top fitting on almost every E61 brewing group. You can find the male stop on brands such as Vibiemme, La Scala, Bezzera, Grimac, Faema, La Pavoni, Wega and Brasilia espresso machines. This male cap has a diameter of 16mm. It has been made from brass and has been nickel and chrome plated. The thread used is a 3/8” BSP-G...
                                        €5.14
                                        compare
                                        Quick-view
                                        Faema E61 stainless steel valve rod Faema E61 stainless steel valve rod

                                          Faema E61 stainless steel valve rod

                                          On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...
                                          €13.15
                                          compare
                                          Quick-view
                                          Asco (Sirai) pressure switch P302/6 Asco (Sirai) pressure switch P302/6

                                            Asco pressure switch P302/6

                                            The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...
                                            €74.07
                                            compare
                                            Quick-view
                                            Faema E61 complete steam valve Faema E61 complete steam valve

                                              Faema E61 complete steam valve

                                              The steam and water valve on this page can be found on various old and new Faema models. The Faema part reference for this item is 903743000  This valve has on the steam/water tube side a female thread of 3/8” BSP-G. On the inlet side the thread is a male 3/8” BSP-G. This steam/water valve does not come with a knob. You can also use the original Bakelite...
                                              €70.43
                                              compare
                                              Quick-view
                                              Faema E61 steam/water group expanding spring Faema E61 steam/water group expanding spring

                                                Faema E61 steam/water group expanding spring

                                                The compression spring on this page is used in a variety of Faema espresso machines. What is the function of this spring? This spring is a steam and water valve spring in the iconic E61 style of steam and water valves. This spring holds the valve closed. The Faema part reference for this compression spring is 4731135884. The steam and water valve...
                                                €2.25
                                                compare
                                                Quick-view
                                                Faema E61 heating element gasket 57x43x3mm Faema E61 heating element gasket 57x43x3mm

                                                  Faema E61 heating element gasket 57x43x3mm

                                                  On this page you will find a heating element gasket we had made out of AFM34 a food safe fibre material, made in Germany. This heating element gasket has a outer diameter of 57mm a inner diameter of 43mm and a thickness of 3mm. This heating element gasket can be used on a variety of heating elements such as the Faema E61, Faema E61 Legend, Faema E61...
                                                  €4.45
                                                  compare
                                                  Quick-view
                                                  Flex pipe 2000mm 3/8 ff conical base Flex pipe 2000mm 3/8 ff conical base

                                                    Flex pipe 2000mm 3/8 ff conical base

                                                    On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...
                                                    €18.50
                                                    compare
                                                    Quick-view