Filter by
Price
€ €
Filter

Faema E61 Jubilé

Faema E61 Jubilee spare parts

The Faema E61 legend and the Faema E61 jubilee are re-introduced around the turn of the century. The design was kept the same, but technically the machine was updated to with modern features. Like replacing the mercury switch with a modern Sirai pressure switch, temperature probe and with the newer machines a internal pump.

With the introduction of the Faema E61 jubilee lifted the traditional machine to a new level. This model is solenoid operated instead of with the manual valves like with the original Faema E61. Which is standard for a modern espresso machine.

In this overview you can find most parts for the Faema E61 legend and Faema E61 jubilee espresso machine. If you can't find the parts your looking for just send a email.

Faema E61 Jubilé spare parts
Faema E61 inox filter 10.5x0.3mm Faema E61 inox filter 10.5x0.3mm

    Faema E61 inox filter 10.5x0.3mm

    On this page you will find a small stainless steel water filter. This filter mesh goes into the top of the Faema E61 brewing groups. This filter membrane prevents clogging up of the nozzle in the group. The Faema part reference for this item is 4771135894.  This wire mesh membrane is made from stainless steel and has a outer diameter of 10,mm and a...
    €1.32
    compare
    Quick-view
    Faema E61 steam valve pin Faema E61 steam valve pin

      Faema E61 steam valve pin

      The small brass tab spindle can be found on various Faema espresso machines. Primarily in the E61 style of steam and water valve. The Faema part reference for this item is 4811135880  This tab spindle has been made from brass and has a overall length of 20,8mm. You can use this tab spindle on the Faema E61, Faema E61 Legend, Faema E61 Jubilee, Faema...
      €2.15
      compare
      Quick-view
      Faema E61 legend pump motor Faema E61 legend pump motor

        Faema E61 legend pump motor

        Where the classic Faema E61 espresso machine had a external motor. The Faema E61 Legend and Faema E61 jubilé has a internal espresso machine motor. The motor used in a Faema E61 legend and Jubile is made by Elettromeccanica Ing F. Arduini and has 150W with 230V 50-60Hz. To start the motor there is a condenser installed of 10 µf. The coffee machine motor...
        €208.00
        compare
        Quick-view
        Faema E61 stainless steel valve rod Faema E61 stainless steel valve rod

          Faema E61 stainless steel valve rod

          On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...
          €10.48
          compare
          Quick-view
          Faema E61 filterbasket single 7gr Faema E61 filterbasket single 7gr

            Faema E61 filterbasket single 7gr

            Stainless steel single filterbasket suitable for a Faema E61 brewing group. The basket can contain 7grams of coffe. The outside diameter is 69,5mm and the height of the basket is 24mm.If you are looking for a double filterbasket click there. Return to the Faema E61 group parts overview
            €4.58
            compare
            Quick-view
            Washer 14x8x1mm brass Washer 14x8x1mm brass

              Washer 14x8x1mm brass

              On this product page you will find a brass washer. This brass washer is used in the iconic steam and water valve used on the Faema E61 espresso machines. This washer prevents that the shaft gaskets are being destroyed with the threads on the valve shaft. The Faema part reference for this part is 4051050569  This brass flat washer has a outer diameter of...
              €1.52
              compare
              Quick-view
              Faema E61 steam/water valve gasket holder Faema E61 steam/water valve gasket holder

                Faema E61 steam/water valve gasket holder

                On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...
                €5.45
                compare
                Quick-view
                Stainless ball 8mm Stainless ball 8mm

                  Stainless ball 8mm

                  The stainless steel ball on this page has a diameter of 8mm. you can use this stainless steel ball in various applications. They are used in the Faema Zodiac Lever groups in the flow regulator.But the stainless steel ball bearing can also be used in the steam and water valves with the Vibiemme model like the Replica. In this valve it seals off the boiler...
                  €1.89
                  compare
                  Quick-view
                  3 phase safety thermostat 169-18° 3 phase safety thermostat 169-18°

                    3 phase safety thermostat 169-18°

                    3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...
                    €69.02
                    compare
                    Quick-view
                    Rubber pump motor connector 35mm Rubber pump motor connector 35mm

                      Rubber pump motor connector 35mm

                      The item on this page is a rubber motor coupling. This coupling can be used on various Faema and Cimbali espresso machines. There are 2 types of couplings the 35mm and the 40mm coupling. This is the 35mm This coupling is used on the Faema E61 legend and Faema E61 Jubilee espresso machines, the 40mm coupling won’t fit this application. The Faema part...
                      €9.18
                      compare
                      Quick-view
                      Faema E61 valve rod washer stainless Faema E61 valve rod washer stainless

                        Faema E61 valve rod washer stainless

                        This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...
                        €0.59
                        compare
                        Quick-view
                        Faema E61 PTFE gasket...

                          Faema E61 PTFE gasket 26x21x2mm

                          This PTFE gasket is used in the Faema E61 brewing groups, this also includes the modern Faema E61 brewing groups. The Faema part reference for this item is 4701136003. In the antique Faema E61 espresso machines it is also used to seal off the inlet of the water inlet, on the valve guide side. This gasket has been made from PTFE. The outer diameter is 26mm...
                          €1.10
                          compare
                          Quick-view
                          Faema E61 valve rod spring Faema E61 valve rod spring

                            Faema E61 valve rod spring

                            This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...
                            €0.90
                            compare
                            Quick-view
                            Faema E61 gigleur spring Faema E61 gigleur spring

                              Faema E61 gigleur spring

                              Faema E61 stainless steel gigleur spring. if your replacing this part don't forget to replace the rest of the sealing parts of the group. We offer a handy rebuilding kit for that. (the gigleur spring is also in that kit) Return to the Faema E61 group parts overview
                              €1.28
                              compare
                              Quick-view
                              Filterholder gasket 72.5x57x8 mm Filterholder gasket 72.5x57x8 mm

                                Filterholder gasket 72.5x57x8 mm

                                On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...
                                €2.92
                                compare
                                Quick-view
                                Faema E61 moustache set Faema E61 moustache set

                                  Faema E61 moustache set

                                  On this product page you will find the black L shaped plastic attachments for the side panels on Faema E61 and Faema President espresso machines. These side panels are mirrored from each other so they are not interchangeable. To install them you need to screw 3 small screws in the back. They are made in Italy. You can use them on the Faema E61, 1 to 4...
                                  €22.97
                                  compare
                                  Quick-view
                                  Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

                                    Lucifer solenoid valve 2 way 1/8" 1/8" 24V AC 9W

                                    The solenoid valve on this product page is one made by the company Lucifer. The coil states Parker, this is the main company. This solenoid valve is used in various La Cimbali and Faema espresso machines. This solenoid valve is a 2 way valve. The coil used is a 9W 24V model. The hole diameter is 2,5mm and is sealed off with a FKM seal. The maximum...
                                    €82.93
                                    compare
                                    Quick-view
                                    Faema E61 group net holder Faema E61 group net holder

                                      Faema E61 group net holder

                                      This brass filter holder is used on the Faema E61 brewing group. This item has the Faema part reference of 4151135895. This brass filter holder slides over the nozzle in the op of the brewing group. In the widest section is the stainless steel filter placed with a brass ring on top of it. To keep the filter holder in place there is a nozzle spring...
                                      €1.93
                                      compare
                                      Quick-view
                                      Faema E61 pump manometer Faema E61 pump manometer

                                        Faema E61 pump manometer

                                        On this product page you will find a pump manometer suitable for the vintage Faema E61 but also for the modern Faema E61 Jubilee and the Faema E61 Legend espresso machines. The part reference for the Faema E61 Legend and Jubilee is 3781135801  This pressure gauge has a scale which goes from 0 – 16 bar of pressure. The body has a outer diameter of 52mm and...
                                        €27.33
                                        compare
                                        Quick-view
                                        Anti vacuum valve V.A.R. 1/4" Anti vacuum valve V.A.R. 1/4"

                                          Anti vacuum valve V.A.R. 1/4"

                                          On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
                                          €8.70
                                          compare
                                          Quick-view
                                          Brewing group gigleur 0.6mm Brewing group gigleur 0.6mm

                                            Brewing group gigleur 0.6mm

                                            Faema E61 brass brewing group gigleur 0.6mm. this is also suitable for most of the E61 style brewing groups and a variety of modern commercial espresso machines  Return to the Faema E61 group parts overview
                                            €1.26
                                            compare
                                            Quick-view
                                            Faema E61 steam valve knob Faema E61 steam valve knob

                                              Faema E61 steam valve knob

                                              On this product page you can find a steam and water valve knob suitable for a variety of older Faema lever espresso machines. Note: this knob isn’t made from Bakelite like the originals. This plastic steam and water valve has in the middle of the knob a square bushing which can accept a shaft of 7x7mm. The knob has been made in Italy. This steam and water...
                                              €14.75
                                              compare
                                              Quick-view
                                              Faema E61 steam tube Faema E61 steam tube

                                                Faema E61 steam tube

                                                The straight steam tube on this page can be used on a variety of Faema espresso machine models. This is a straight tube and can be bend into every shape you want, not too much off course This steam tube has been made from chrome plated copper. The fitting on the valve side is a 3/8” BSP-G thread and on the steam tip side is a 1/8” BSP-G thread. This steam...
                                                €25.36
                                                compare
                                                Quick-view
                                                IMS Faema single cup filter basket 7/9 gr IMS Faema single cup filter basket 7/9 gr

                                                  IMS Faema single cup filter basket 7/9 gr

                                                  The filterbasket on this page is one of the most commonly found filter basket models. This model is made by IMS Filtri in Italy. The basket is from the competition line and not the standard line. The single filterbasket on this page has the IMS product code B701TH26.5E This single filterbasket can hold ground coffee from 7 grams up to 9grams. The basket...
                                                  €22.25
                                                  compare
                                                  Quick-view
                                                  E61 style groups shower without welding 60mm E61 style groups shower without welding 60mm

                                                    E61 style groups shower without welding 60mm

                                                    The function of a shower screen is to spread the water coming out off the group on a equal way over the coffee. One of the standardized sizes and most common, is the 60mm shower screen. This shower is a pressed model made by IMS IMSDR300. The outer diameter is 60mm, the internal height is 17mm and the diameter of the punctured holes is 2,5mm Note: this is...
                                                    €4.02
                                                    compare
                                                    Quick-view
                                                    IMS Faema double cup filterbasket 12/18gr IMS Faema double cup filterbasket 12/18gr

                                                      IMS Faema double cup filterbasket 12/18gr

                                                      A lot of the filterbasket sizes are quite standardized. This IMS filterbasket is good example of this. The basket is made by IMS filtra, but it is a competition basket and not from the standard IMS basket line.  The IMS part number for this double filterbasket is B702TH24.5M. The double filterbasket is made from stainless steel 304, food safe. The outer...
                                                      €20.32
                                                      compare
                                                      Quick-view
                                                      Faema E61 valve gasket 13x4x4mm Faema E61 valve gasket 13x4x4mm

                                                        Faema E61 valve gasket 13x4x4mm

                                                        The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...
                                                        €0.59
                                                        compare
                                                        Quick-view
                                                        Flex pipe 2000mm 3/8 ff conical base Flex pipe 2000mm 3/8 ff conical base

                                                          Flex pipe 2000mm 3/8 ff conical base

                                                          On this page you will find a stainless steel water hose. This hose can be used to connect the water mains to your espresso machine any other suitable appliance. This stainless steel flex hose has a overall length of 2000mm and on each end a 3/8” BSP-G fitting. This connection is conical so there is no need to a gasket. The maximum fluid temperature which...
                                                          €14.75
                                                          compare
                                                          Quick-view