Faema E61 espresso machine 
Espresso machine pressure switches 
Espresso machine solenoid valves Gaggia Factory G105-G106 - Boiler and body
Gaggia Factory G105-G106 - Boiler and body
There are 10 products.Our selection of Gaggia Factory G105-G106 Boiler and body parts
La Pavoni Europiccola boiler cap o ring
This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La...
La Pavoni Europiccola boiler gasket
This gasket is one of the few ones which does not need to seal off water. But is used as a gasket between 2 metal surfaces. This gasket can be used on various models of domestic La Pavoni lever espresso machines. The part reference for this item is 362019 This gasket has a outer diameter of 93mm a inner diameter of 80mm and a thickness of 2mm. You can...
La Pavoni Europiccola stainless steel grid
Is the grid missing of your La Pavoni Europiccola(324021), Professional, Romantica or Gaggia G105(S324021). You can find the replacement grid on this page. To make your lever espresso machine complete again. This item is suitable for the Pre-millenium and millennium la Pavoni lever espresso machines. The grid has been made out of stainless steel and has...
La Pavoni Europiccola heating element...
On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
La Pavoni Europiccola heating element...
It is always possible that your old heating element for your La Pavoni Europiccola, La Pavoni Romantica, La Pavoni Stradivari or your Gaggia 105 burns or gets a short. The other option is that you purchased a old model La Pavoni Europiccola and you want to convert your classic lever espresso machine to a proper 120V version. This model of heating element...
La Pavoni Europiccola pressure switch
The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The...
La Pavoni Europiccola plastic drain tray
The La Pavoni (and Gaggia) plastic drain tray (371104) is used on a variety of models like the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Romantica and finally On the Gaggia 105(S371104). The plastic drain tray hasn’t been there from the beginning. The first la Pavoni’s had a flat surface where you needed to put your coffee...
La Pavoni Europiccola plastic drain grid
For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one. On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...
La Pavoni pressure switch pipe
The newer model of la Pavoni Europiccola and all the models of the Pavoni Professional use a modern pressure switch. Currently those are the Ma-ter Echo pressure switches. Seen these can’t be installed directly into the heating element (the pressure switch would stick out the bottom off the base). For this problem they have found a solution....
La Pavoni Europiccola heating element...
It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element....
Follow us