Bezzera Mitica

The drain valve is responsible for draining the last water out of the E61 style brewing group. This espresso machine part is made up out of 4 parts. The gasket holder, the gasket, small brass washer and a triangular valve rod. The total length of this part is 27mm. This drain valve used in a variety of espresso machine brands like: Expobar CTAV1-05,...

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...

This PTFE gasket is used in the Faema E61 brewing groups, this also includes the modern Faema E61 brewing groups. The Faema part reference for this item is 4701136003. In the antique Faema E61 espresso machines it is also used to seal off the inlet of the water inlet, on the valve guide side. This gasket has been made from PTFE. The outer diameter is 26mm...

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used as a return spring for the top exhaust valve. When the lever is in the raised position this spring will keep the drain valve in the closed position. This stainless-steel compression spring has an outer diameter of 14mm. The length of...

On this page you will find a espresso machine pump suitable for a variety of espresso machines. This pump has been made by the company Procon in Ireland.  This model is a clamp ring pump, this pump is clamped with a stainless steel clamp to the espresso machine motor. The pump can pump 180 L/H and is fitted with a balanced bypass. To control the pump...

On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...

Wega group plug

This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...

The item shown on this page is the last item on a Faema E61 brewing group, as well on some other e61 style brewing groups. This is the drain fitting which is all the way on the bottom of the brewing group. This model of drain can be used on the brands Faema, Grimac, Pavoni and Wega espresso machines. The Faema part reference for this item is 4152135921,...

On this page you will find a o ring which has a cord diameter of 2,62mm and a internal diameter of 20,63mm. the material for this o ring is Viton. The application in espresso machines for this o ring is really broad. This ranges from application in brewing groups with brands like ECM Heidelberg, la Scala, Bezzera and Brasilia. But also the application in...

The brass cam guide bushing shown on this page is used on the Faema E61 and E61 style brewing groups.  You can use this guide bushing on Faema, Grimac, Vibiemme, La Scala, Bezzera, Wega, Pavoni espresso machines. This brass bushing has a overall length of 28mm. The outer diameters are 10 and 15mm. The inner diameter is 8mm and the head thickness is 5mm....

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This is the spring located in the upper section of the brewing group, in the trumpet/mushroom. This stainless-steel compression spring has a outer diameter of 13mm. The length of this compression spring is 42mm. This spring has been made in Italy. This...

Every brewing group uses a portafilter gasket. In this case it is a 73x57x9mm gasket. In this case they are made from a food grade nitrile butadiene rubber(Nbr)The OD and ID of 73x57mm is quite a standard size. You will see this size with brands like Expobar, Vibiemme (VBM), La Scala, Bezzera, Faema and Azkoyen. This doesn’t mean that these brands don’t...

The item on this product page is a stainless steel water filter, this filter is used with various espresso machine brands in the top of the brewing group. You can find this filter with brands such as ECM Heidelberg, San Remo, Vibiemme, La Scala, Bezzera, Grimac, Astoria, La Pavoni and wega. This stainless steel water filter has a outer diameter of 8,5mm...

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used at the cam shaft. This spring is compressed in the cam shaft assembly. Due to this compression the cam shaft gaskets will always seal off the shaft. This stainless-steel compression spring has a outer diameter of 15mm. The length of this...

The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...

On this product page you will find a portafilter gasket suitable for a variety of antique Faema espresso machines. As well for the Faema Marte, Faema Mercurio, Faema E61. This portafilter gasket has a outer diameter of 72,5mm a inner diameter of 57mm and a thickness of 8mm. This gasket has been manufactured from NBR. As mentioned before you can use this...

This stuffing nut is used to set even pressure on the gaskets of the cam shaft used in the E61 brewing groups. This nut can be used on the classical Faema E61 as well as the modern E61 style brewing groups. Such as Bezzera, La Scala, Grimac, Isomac, Pavoni, Brasilia and Vibiemme. This stuffing nut has been made from nickel and chrome plated brass. The...

On this page you will find a Fluid o Tech espresso machine pump. The model specification of this pump is Standard. This pump has a clamp ring connection, so a stainless steel clamp is used to connect it to the motor. This pump can pump 200 L/H and is equipped with a balanced bypass. The in and outlet of this pump have a 3/8” BSP-G thread. The pump has...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...

This EPDM gasket is one of the most commonly used sizes of gasket. This gasket has a outer diameter of 15,5mm a inner diameter of 7,5mm and a thickness of 4mm. This gasket can be used in various applications with the old Faema Lever espresso machines. such as a gasket for sealing off valve shafts. But you will find this gasket in the Faema E61 and the...

This espresso machine motor is made by the Italian company RPM (model number 11002728). The motor itself has 165W with 230V 50/60hz. To power the motor up it has a capacitor of 10 µf. This is one of the more standardized espresso machine motors and is being used by a variety of coffee machine manufacturers. This pump is a clamp ring motor. So the...

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

The item on this product page is used in the famous Faema E61 brewing groups, but it can also be used on various other E61 style of brewing groups. This valve component can be used on E61 style of brewing groups used by Royal, La Scala, Bezzera, Isomac, Pavoni. The part reference numbers can be found in the extra info tab This valve assembly is used in...

The item on this product page is a spring guide bushing used on various E61 Style of brewing groups. You can use this item with brands such as ECM Heidelberg, La Scala, Bezzera, Isomac, Pavoni and Brasilia. The Bezzera part reference is 7479942, the Brasilia part reference number is 13657.0.00.04, for ECM Heidelberg it is B7479942, for Isomac ISBUS313116...

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...

The gasket on this page is a Polytetrafluoroethylene (PTFE) gasket with the dimensions 35x30x2mm. This specific gasket is used on 3 specific places on the E61 style brewing group (the Faema E61 and Faema E61 legend group use a different size of ptfe gasket). It is used to seal off the top trumpet or drain sleeve, on the side of the group the camme holder...

Faema E61 filterholder gasket 8.5mm nbr. The middle size portafilter gasket available for the E61 brewing group. There are 3 thickness sizes available for the E61:8mm; 8,5mm; 9mm.If your portafilter doesn't fit as you want, there are always thinner shims available to add to the gaskets:0,5mm; 0,8mm.It's always handy to purchase some gaskets extra,...

On this page you will find a brewing group spray nozzle. This nozzle is one of the most used spay nozzles used in the world of espresso machines. The nozzle has a outer diameter of 30mm and the male thread, which threads into the brewing group, is M10x1mm. What is the purpose of having a nozzle. Well the spray nozzle is located above the shower screen....

The item shown on this page is a cam shaft which is used on the Faema E61 and various other E61 style of brewing groups.  Such as Bezzera and La Pavoni e61 style groups. The Faema part reference for this item 3161136650, the Bezzera part reference is 7479950 and for La Pavoni the reference is 314077. This brass cam shaft has a overall length of 82mm. The...

On this product page you will find one of the most commonly used pressure switches. The Ma-Ter XP110 pressure switch. This pressure switch is rated from 0,5bar up to 1,5bar. The pre-calibrated pressure is 1 bar. The brass fitting has a male ¼” BSP-G thread on it. This switch is rated to 16A at 125/250V.

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...

On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...