La Pavoni Professional boiler gasket
La Pavoni Professional boiler gasket. Goes inbetween the boiler and base.Also suitable to use on the bottom for the bakelite flange.
€6.27
0
My cart
La Pavoni Professional - spare parts
La Pavoni safety valve drain cup
Every La Pavoni Europcciola, La Pavoni Stradivari and La Pavoni Professional is equipped with a boiler safety valve/pressure relief valve. This item can be used with the pre-millenium and the millennium models. With the earliest models when there is no pressure switch this is the main form of pressure relief of the boiler. The Boiler relief valve is...
€42.25
La Pavoni Europiccola level protector
The earlier models of the La Pavoni Europiccola already had some sort of a protection to keep the sight glass safe. These sight glass protectors were installed at the same moment that the sight glass was installed. Seen they needed to slide over the sight glass completely. In the 1990ies you get the first models of plastic cover, the stainless-steel cover...
€12.51
La Pavoni Europiccola 1 coffee filterbasket millenium
On this page you will find a stainless steel filterbasket. This filterbasket is suitable for the La Pavoni Post millennium brewing groups. This single filterbasket has a outer edge which is 60mm. the height of the filterbasket is 20,5mm The filterbasket itself can hold approximately 7 grams of ground coffee for a single coffee. For which models is this...
€5.60
La Pavoni Europiccola perforated washer
On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...
€4.71
La Pavoni Europiccola boiler gasket
This gasket is one of the few ones which does not need to seal off water. But is used as a gasket between 2 metal surfaces. This gasket can be used on various models of domestic La Pavoni lever espresso machines. The part reference for this item is 362019 This gasket has a outer diameter of 93mm a inner diameter of 80mm and a thickness of 2mm. You can use...
€5.44
La Pavoni Europiccola chrome stuffing nut
The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...
€7.06
La Pavoni Europiccola brass nut
The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...
€5.38
La Pavoni Europiccola group piston
The item on this page is a brass piston for La Pavoni and Gaggia lever espresso machine groups. This piston can be used on pre-millennium and millennium brewing groups. In the period between approx. 1996 and 2006 the pistons were made from Teflon. This idea was discontinued after 2006 and they got back to the brass pistons again. The Gaggia part reference...
€55.37
La Pavoni Europiccola steam pipe complete
The steam tube on this product page is a OEM/Original La Pavoni product. This steam tube is used on various late model pre-millennium as well as millennium lever espresso machines. The La Pavoni part reference for this item is 3432374 This steam tube is installed with a bayonet fitting. So there are no tools required. This chrome plated steam tube does...
€102.73
Pavoni millenium tamper 51.5mm American walnut
This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...
€67.93
La Pavoni Europiccola lever roller
This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...
€6.38
La Pavoni Europiccola manometer fitting and sight glass holder gasket
The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021. This...
€1.56
La Pavoni Europiccola group gasket
The o ring on this page can be used as a seal between the lever brewing group and the water boiler of a variety of La Pavoni domestic lever espresso machine models. The La Pavoni part reference for this item is 465128 This o ring is not suitable for the old models, the ones which screw into the boiler. Besides that you can use this o ring on every group....
€3.28
La Pavoni Europiccola plastic drain tray
The La Pavoni (and Gaggia) plastic drain tray (371104) is used on a variety of models like the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Romantica and finally On the Gaggia 105(S371104). The plastic drain tray hasn’t been there from the beginning. The first la Pavoni’s had a flat surface where you needed to put your coffee cup. Later on,...
€7.79
La Pavoni Europiccola heating element 1000W 230V
It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element. The...
€55.65
La Pavoni Europiccola plastic drain grid
For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one. On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...
€15.84
La Pavoni Europiccola complete steam tap
The item on this product page is a OEM/Original La Pavoni spare part. This item is a complete steam valve for various domestic La Pavoni lever espresso machines. This steam valve can be used on Millennium as well on late models of the pre-millennium La Pavoni’s. This steam valve can only be used in combination with the steam tube with bayonet fitting. The...
€142.17
La Pavoni Europiccola pressure switch
The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
€18.92
La Pavoni Europiccola viton tap gasket
The item on this product page is a shaft gasket for the steam valve on various domestic La Pavoni and Gaggia lever espresso machines. This gasket seals off the shaft from the boiler. This shaft gasket can be used on Millennium and Pre-Millennium models. The part reference for La Pavoni is 361023 and for Gaggia it is S361023. This gasket has been made from...
€2.62
La Pavoni Europiccola and Professional base foot 30mm
The item on this product page is a OEM/Original La Pavoni spare part. This item is the rubber foot which goes underneath various La Pavoni and Gaggia domestic lever espresso machines. The part reference for this item is for Gaggia S371101 and for La Pavoni 371101. This rubber foot has a outer diameter of 30mm and can be installed in the base plates with...
€3.62
La Pavoni Europiccola heating element gasket silicone
On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
€4.03
La Pavoni Europiccola 12X17X1mm washer
The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003 and for Gaggia the reference is S313003 This washer is suitable for Pre-millennium as well for Millennium espresso machines....
€5.12
La Pavoni Europiccola boiler cap o ring
This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...
€1.09
La Pavoni Europiccola brewing group sleeve
The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...
€40.65
La Pavoni Europiccola spring
The big spring shown on this page is a filterbasket spring. This filterbasket spring is used to keep the filterbasket in it’s place. This filter locking spring can be used on pre-millennium as well on Millennium La Pavoni portafilters. The La Pavoni part reference for this item is 311437 You can use this filter locking spring with single as well as with...
€5.76
Pavoni pre-millenium tamper 49.5mm American walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94
La Pavoni Europiccola and Professional base plate model 2
The plastic base plate shown on this page is used with various domestic La Pavoni lever espresso machines. This base plate is a OEM/Original La Pavoni spare part. The La Pavoni part reference for this item is 371174. This plastic base plate is the later model. This base plate is installed from the bottom of espresso machine and held in place with a screw....
€24.96
La Pavoni Europiccola complete group piston
La Pavoni Europiccola complete group pistonReturn to the Pavoni Europiccola group parts overview
€77.05
La Pavoni Europiccola shaft gasket
The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....
€7.68
La Pavoni Europiccola pre-millenium portafilter gasket
On this page you will find a portafilter gasket suitable for various lever brewing groups. This gasket is suitable for pre-millennium groups. The La Pavoni part reference for this item is 2612005 This portafilter gasket has a outer diameter of 60mm a inner diameter of 55mm and a gasket of 5,5mm. This gasket is a square version. This gasket can be used in...
€7.68
Pavoni pre-millenium tamper 49.5mm European walnut
This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...
€67.94
La Pavoni Professional pre-millenium boiler and group kit
This set is suitable for La Pavoni Professional pre millennium. 465225 - Heating element o ring (only for stainless steel heating element) 1x 465204 – boiler knob o ring 1x 362020 – sight glass gasket 2x 465128 – group locking o ring 1x 361005 – piston gasket 2x 465300 – portafilter o ring 1x 362019 - boiler gasket 1x362081 - boiler gasket 1x 361023 -...
€62.55
Brooks - Pavoni Europiccola bottomless portafilter pre-mill American Walnut
The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You will find that type of brewing group on la Pavoni lever espresso machines such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The La Pavoni part reference for this item...
€96.25
Europiccola bottomless portafilter millenium
The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...
€52.01
La Pavoni pre millenium Europiccola and professional gasket set
Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...
€20.86
Overview of the La Pavoni Professional Espresso Machine
The La Pavoni Professional, introduced in 1976-1977, stands as the esteemed big brother of the La Pavoni Europiccola. While sharing the foundational design of the Europiccola lever espresso machine, the Professional 16 model boasts several enhancements. Notably, it features a larger 1.6-liter water boiler, a standard pressure gauge, and an included pressure switch right from the outset. These innovations have since become standard equipment on the La Pavoni Europiccola as well.
Two Styles of Lever Brewing Groups
The La Pavoni Professional PL is available with two distinct styles of lever brewing groups:
- Pre-millennium group
- Millennium group
Categories of Espresso Machine Parts
Our selection of espresso machine parts is conveniently divided into two categories to help you find exactly what you need:
Lever Group, Steam Wand, and Water Level Components
In this section, you'll discover essential parts such as:
- Brooks piston gaskets
- Portafilter gaskets
- Portafilters
- Filter baskets
- Sight glass
- Sight glass gaskets
- Iconic manometer
These components are crucial for maintaining optimal performance and ensuring a consistently excellent espresso brewing experience.
Boiler and Body Parts
On the second page, you'll find a comprehensive range of boiler and body parts for the La Pavoni Professional. This includes:
- Stainless steel heating elements, available in 110V
- Body panels
- Switches
- Pressure switches
- Safety valves
These components play a vital role in the overall function and durability of your espresso machine.
Get Expert Assistance
If you have any questions or need assistance with your La Pavoni Professional espresso machine, our knowledgeable team is here to help. Don't hesitate to reach out to us for personalized support and guidance. We're dedicated to ensuring that your espresso machine performs at its best, so you can enjoy delicious espresso with every brew.