La Pavoni Vasari

Brass nipple 3/8" x 3/8" MM BSP-G Return to our fitting overview

La Pavoni showerReturn to the La Pavoni Bar modern parts overview

Gaggia XD heating element 3 gr 5000/5950W 230V Type flangedwatt 5000/5950volt 220/240length (mm) 400

On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...

La Pavoni closing plugReturn to the La Pavoni Bar modern parts overview

This type of piston gasket is one of the most used models in the lever espresso machine world. But this one is different. Yes the dimensions are the same 52x40x7mm but the material is different then with the standard piston gaskets. They are made from clear silicone. This will make them last a lot longer then the standard ones made from NBR. The type of...

Flat copper gasket 23x17x1.5mm Return to the Faema E61 valve parts overview

The spring on this product page is used for various applications with various brands. This spring is used in water inlet systems, steam and water valves and non return valves. You will find this model of compression spring with brands such as Brasilia, La Spaziale, Faema, Grimac, Vibiemme and La Scala. This stainless steel compression spring has a outer...

La Pavoni beating rubberReturn to the La Pavoni Bar modern parts overview

La Pavoni chrome leverReturn to the La Pavoni Bar modern parts overview

Flat copper gasket 19x13.4x1.5mm 1/4"

With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.

This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...

OR 3.68x1.78mm

La Pavoni boltReturn to the La Pavoni Bar modern parts overview

Anti vacuum valve TV 1/4". Suitable for:CodeProducerA10220 Astra000634 Aurora-brugnetti7452502 Bezzera05062.4.00.09 Brasilia01.00504 Carimali418-911-002 Cimbali418-911-010 Cimbali418911010 Cimbali408898 ContiC219900560 Ecm00200034 Elektra65000205 Expobar2161-118968 Faema2161118968 Faema418911002 Faema...

With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...

The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...

On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...

La Pavoni valve gasketReturn to the La Pavoni Bar modern parts overview

This EPDM gasket is one of the most commonly used sizes of gasket. This gasket has a outer diameter of 15,5mm a inner diameter of 7,5mm and a thickness of 4mm. This gasket can be used in various applications with the old Faema Lever espresso machines. such as a gasket for sealing off valve shafts. But you will find this gasket in the Faema E61 and the...

La Pavoni bearing rollerReturn to the La Pavoni Bar modern parts overview

La Pavoni ptfe gasketReturn to the La Pavoni Bar modern parts overview

Gaggia XD heating element 2 gr 4000/4760W 230VType flangedwatt 4000/4760volt 220/240length (mm) 310

La Pavoni valve bodyReturn to the La Pavoni Bar modern parts overview

La Pavoni pressure tabReturn to the La Pavoni Bar modern parts overview

On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...

Gaggia heating element gasket EN50X40X3MM

This small stainless steel spring is used in various Faema steam and water valves. This compression spring keeps a constant pressure on the steam and water valve shaft gaskets, so that they will seal all the time. This is also the case for the water inlet valves for the old E61 and lever brewing group espresso machines. The Faema part reference for this...

La Pavoni portafilter gasketReturn to the La Pavoni Bar modern parts overview

The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...

La Pavoni lever gasketReturn to the La Pavoni Bar modern parts overview

La Pavoni group springReturn to the La Pavoni Bar modern parts overview

Spring for steam valve

La Pavoni piston gasketReturn to the La Pavoni lever group parts overview

La Pavoni sight glass 106x12mm red line