La Pavoni Diamante

Brass nipple 3/8" x 3/8" MM BSP-G Return to our fitting overview

This Gicar level regulator is one of the most simple and common level regulators you will find. This model has the current Gicar code of 9.1.40.71G. there are a lot more product codes, you can find those in the extra info tab.This Gicar level regulator has the name NRL30/1E-2C/F and runs on 230Vac.You can find this level regulator on various espresso...

On this page you will find a brass gasket holder, this holder is used in steam and water valves on the older Faema E61 and Faema lever espresso machines. The Faema part reference for this item is 2151136654. This brass gasket holder has on one side space for the valve gasket, this gasket is 13x4x4mm. On the other side is a space for the tap spring, which...

La Pavoni valve gasketReturn to the La Pavoni Bar modern parts overview

La Pavoni group springReturn to the La Pavoni Bar modern parts overview

The small brass tab spindle can be found on various Faema espresso machines. Primarily in the E61 style of steam and water valve. The Faema part reference for this item is 4811135880  This tab spindle has been made from brass and has a overall length of 20,8mm. You can use this tab spindle on the Faema E61, Faema E61 Legend, Faema E61 Jubilee, Faema...

The valve gasket on this page is one of the most common flat gaskets you can find in a espresso machine. This gasket is made from NBR and has a outer diameter of 13mm a inner diameter of 4mm and a thickness of 4mm. This type originates from Faema espresso machines. where you can find this gasket in the Faema E61, Faema President, Faema Lambro Faema Urania...

The Asco P302/6 is a three-phase pressure switch that is likely the most frequently used pressure switch. Espresso makers like as La Marzocco, Faema, Cimbali, Wega, Astoria, Nuova Simonelli, La Spaziale, San Remo, and others have utilized this pressure switch.The company Sirai used to be the brand Asco; nonetheless, the product is still the same despite...

Hardened stainless steel guide

On this page you will find a o ring with the dimensions 10,78x2.62mm. It is made from FKM (viton is a registered trade brand, but the material is identical) This o ring is used in a variety of locations in espresso machines. It is used with steam and water wands in espresso machines with brands like: Marzocco, Casadio, Vibiemme, Grimac, Cimbali and Faema....

La Pavoni bearing rollerReturn to the La Pavoni Bar modern parts overview

Gaggia XD heating element 3 gr 5000/5950W 230V Type flangedwatt 5000/5950volt 220/240length (mm) 400

The spring on this product page is used for various applications with various brands. This spring is used in water inlet systems, steam and water valves and non return valves. You will find this model of compression spring with brands such as Brasilia, La Spaziale, Faema, Grimac, Vibiemme and La Scala. This stainless steel compression spring has a outer...

La Pavoni pressure tabReturn to the La Pavoni Bar modern parts overview

Anti vacuum valve TV 1/4". Suitable for:CodeProducerA10220 Astra000634 Aurora-brugnetti7452502 Bezzera05062.4.00.09 Brasilia01.00504 Carimali418-911-002 Cimbali418-911-010 Cimbali418911010 Cimbali408898 ContiC219900560 Ecm00200034 Elektra65000205 Expobar2161-118968 Faema2161118968 Faema418911002 Faema...

La Pavoni portafilter gasketReturn to the La Pavoni Bar modern parts overview

On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...

La Pavoni beating rubberReturn to the La Pavoni Bar modern parts overview

This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return spring....

On this page you will find a steam and water valve shaft used in various Faema espresso machines. This valve shaft has the Faema part reference of 4818135879. This valve haft has been made from stainless steel and has a overall length of 76mm. the male thread on the end is a M6. The square end, for the knob, is 7x7mm. You can use this stainless steel...

Water level gasket

Wega bronze water filter

La Pavoni closing plugReturn to the La Pavoni Bar modern parts overview

Brass o ring guide

This EPDM gasket is one of the most commonly used sizes of gasket. This gasket has a outer diameter of 15,5mm a inner diameter of 7,5mm and a thickness of 4mm. This gasket can be used in various applications with the old Faema Lever espresso machines. such as a gasket for sealing off valve shafts. But you will find this gasket in the Faema E61 and the...

La Pavoni valve bodyReturn to the La Pavoni Bar modern parts overview

La Pavoni shaft headReturn to the La Pavoni Bar modern parts overview

La Pavoni Piston gasketReturn to the La Pavoni Bar modern parts overview

This small stainless steel washer can be found on various Faema espresso machine models, mainly the ones which use the E61 style of steam/water valve. The Faema part references for this item are: 4041136008 and 4054043101  This washer is used in between the valve shaft and the tap spindle. This stainless steel washer has a outer diameter of 9mm and a...

Hardened stainless steel insert

Complete water/steam tap. Suitable for Vibiemme Lollo

With the fitting on this page you can connect for instance 2 copper ¼” to each other or a solenoid valve to a tube. This fitting has on both sides a male ¼”BSP-G thread. This fitting has been manufactured in Italy out of brass.

Flat copper gasket 23x17x1.5mm Return to the Faema E61 valve parts overview

Copper gasket 20x24x1,5mm

Valve assembly for steam valve

La Pavoni boiler gasket 184x170x2mm