Gasket for La Cimbali heating element with four holes (97x55x3mm). The gasket seals the gap between the heating element flange and the boiler flange. The gasket fits the La Cimbali Rubino, La Cimbali Gran Luce, and a variety of other La Cimbali M15 machines.
Always clean the whole mating area for the gasket when changing a fiber gasket. This decreases the likelihood of the replacement gasket leaking.
13-179-L-3186006
1 Item
Data sheet
Brand
Brugnetti La Cimbali
Inner diameter (ID)
56mm
La Cimbali
M15
Outer diameter (OD)
95mm
Thickness
3mm
Type part
Heating element
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
When you replace gaskets in your espresso machine it might be handy that you use some kind of lubricant to lubricate your o rings or rubber like gaskets. But you don’t replace gaskets that often, then the need for a big tube of silicone grease is not a necessity. In this case we have a small, closable, tube of silicone grease. This tube contains 6 grams...
La Cimbali m15 rubber o-ring. When the portafilter is locked in this o-ring makes sure that the water doesn't come true the top of the brewing group ring. Return to the La Cimbali lever parts overview
On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...
La Cimbali M15 lever stainless steel group shower screen. This screen is clamped in place by a spring.Make sure to remove the shower screen regularly to clean it. A dirty shower screen has influence on the taste of the coffee.Return to the La Cimbali lever parts overview
La Cimbali Piston axle. This axle connects the fork lever of the group with the piston shaft. On the outsides of the la cimbali piston axle there are 2 bearings to make the pull action smoother.
To replace a cracked 12x135mm La Cimbali sight glass. If you replace the sight glass, you should also repair the top and bottom seals to avoid leaks.This sight glass is also compatible with the La Cimbali M15, Rubino, and Gran Luce.
When your M15 lever group compression springs are rusted you can replace them cheaply with new ones. The springs are made spring steel, to prevent rusting their galvanisedInternal spring 150x30mmExternal spring 150x48mm These springs also work on the La Cimbali Rubino and the La Cimbali Gran LuceReturn to the La Cimbali lever parts overview