Water valve

Valve rod washer 12x8x1mm

The item on this page is a steam and water valve washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item is 12153.0.00.03. This washer is made from machined brass. the outer diameter is 10,7mm, the inner diameter is 8,2mm and the thickness is 2mm. this washer is made in Italy. You can use this brass washer on...

Rancilio steam./water valve chromed nut

Astoria Wega tap joint spring

Ball Valve 3/8 MF

Rancilio steam valve sleeve

Faema Steam knob insert. Suitable for:CodeProducer30370130 Expobar4831131214 FaemaL165/MV Marzocco

The item on this product page is a flat EPDM gasket. This gasket is used on various Bezzera espresso machines as a water inlet valve gasket. This gasket has the Bezzera part reference numbers 5302502, 5493013 and 5493041. This flat gasket is made from EPDM. The outer diameter is 14mm, the inner diameter is 4mm and the thickness is 4mm.

Astoria Wega valve nut

La Pavoni valve bodyReturn to the La Pavoni Bar modern parts overview

The spring on this page is used in the Faema E61 and various other of E61 style of brewing groups. This spring is used at the cam shaft. This spring is compressed in the cam shaft assembly. Due to this compression the cam shaft gaskets will always seal off the shaft. This stainless-steel compression spring has a outer diameter of 15mm. The length of this...

The nut on this product page is a valve shaft closing nut. This nut is used on various Bezzera espresso machines. This item is a OEM/Original spare part. The part reference is 5221804NC. This steam and water valve tap nut is made from machined brass, which has been nickel and chrome plated afterwards. This item is made in Italy. You can use this on the...

Rancilio clever SX steam valve

Faema No stop valve fitting. pitch 1mm. Suitable for:CodeProducer30370010 Expobar4851117523 FaemaL168/0 Marzocco312226 PavoniRACC3FRUBKO VibiemmeRACCGUIASTEVO Vibiemme

Valve assembly for steam valve

O ring 3.69x1.78mm vitonReturn to the Faema E61 Legend water inlet parts overview

The steam and water valve on this page can be found on various old and new Faema models. The Faema part reference for this item is 903743000  This valve has on the steam/water tube side a female thread of 3/8” BSP-G. On the inlet side the thread is a male 3/8” BSP-G. This steam/water valve does not come with a knob. You can also use the original Bakelite...

La San Marco steam/water valve rear fitting

This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.

Complete water/steam tap. Suitable for Vibiemme Lollo

With this steam valve you can clearly see that there are some resemblances between Faema and Vibiemme. Technically it is as good as identical as a e61 valve, the only difference is that the Vibiemme valve has a stainless-steel ball in the valve. Aesthetically the differences are that the chrome plated tap nut is a lot squarer then the original. And one of...

Faema E61 o ring 18,64x3,53 viton. This o ring seals off the bottom group mushroom. Return to the Faema E61 group parts overview

This o ring is one of the most common parts in the world of espresso machines. The main function of this o ring is to seal off a flanged solenoid valve. Every flanged solenoid valve uses 2 of these. But you will also find them in applications like steam and water valves and water inlet taps. The o ring has a wire diameter of 1,78mm and a internal diameter...

La San Marco steam/water valve nut

Rancilio steam/water valve knob spring

This brass bushing is used on a variety of older Faema lever espresso machines. The Faema part reference for this item is 4151135931. This bushing is used, in combination with a compression spring, to hold a equal pressure to various shaft gaskets. You will find this item in various applications, steam valves, water valves and water inlet valves. The...

Rancilio Clever DX steam valve

On this page you will find the o ring with the cord diameter of 1,9mm and a internal diameter of 7,2mm. This specific o ring is used with a variety of applications in expresso machines. For instance, with Expobar in the water inlet valve. For Faema in the cappuccinatore. With Vibiemme, La Scala, Fiamma, Grimac, Brasilia, ECM Heidelberg and La Carimali in...

La San Marco steam/water valve gasket spring

La San Marco steam/water tap handle

This O ring in nbr with the specifications 8,9x1,9mm. Makes sure that the brass non return valve seals against the body of the non return valve. Return to the Faema E61 valve parts overview

This steam valve spring is used with the Vibiemme Lollo and various models from ECM like Elektronika II Profi and Mechanika. This specif spring is a stainless steel compression spring with the outer diameter of 13mm and a length of 27mm. Where is this specific spring used. It is in this specific steam and water valve spring used as a valve return spring....

The steam pipe spring on this page is suitable for a variety of espresso machine brands, it’s also a universal item. This spring make sure that you can leave your steam tube in a fixed position. If there is no spring, it will fall back to the lowest point. This spring has a external diameter of 12mm and a overall length of 15mm and is made from stainless...

Faema steam/water valve knob. Suitable for:CodeProducer000222 Brugnetti-auroraL165/V Marzocco40500002 Nuova Simonelli

Valve shaft sleeve. Suitable for:CodeProducer95.05033 Carimali30370065 Expobar4151-030015 Faema4151030015 Faema03001500 Futurmat-ArieteL165/7 Marzocco313115 Pavoni10402015 SanremoRACCBUSASRBK Vibiemme

Astoria Wega steam/water valve fitting