Filter by
Price
Type part
more... less
Filter

Astoria CMA lever operated espresso machines

Discover the Craftsmanship of Astoria CMA Lever Operated Espresso Machines

Welcome to our exploration of Astoria CMA's exquisite lever-operated espresso machines. In this guide, we'll delve into the rich history, superior craftsmanship, and innovative features that define these iconic coffee-making marvels.

Astoria lever espresso machine parts

Lever piston gasket 52x40x7mm

On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...
€5.20

Lower water level fitting

The item on this page is a lower water level fitting for the Astoria and Wega espresso machines. This item is OEM/Original spare part. The Astoria part number for this item is 53001 and the Wega part number is WY53001  This lower water level fitting has been casted out of brass and is machined afterwards. The fitting which is used to attach the water...
€46.08

Astoria fork rod post 2001

On this product page you will find the connection between the lever and the lever group itself. In the top of this casted item you will screw the lever itself.  There are 2 holes. 1 of them has a bushing inside so that there is some axial movement possible. In the fixed hole goes the bearing shaft. In the movable hole goes a pin to make a connection with...
€102.41

Astoria heating element 2 group 3700W 220V

The heating element on this page is quite a big model, which goes over 500mm. This specific heating element is made for Astoria and Wega espresso machine models with 3 brewing groups. This heating element is listed with Astoria under 17101 and with Wega the part number is WY17101  This heating element produces 3700W at 230/240V. The heating element has 4...
€105.17

Brass nut M3

The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of  Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of UNI 5587 and...
€0.86

Astoria inner lever stop

On this page you will find a OEM/Original shock absorber for the Astoria and Wega lever brewing groups. This absorber is located inside the lever fork. So when the lever is released by accident this rubber shock absorber will absorb some of the force. This absorber is also used when the lever is in rest position This shock absorber can be used on the...
€9.44

Beating rubber lever group

On this page you will find a gasket type which is a beating rubber. This rubber damping rubber is located underneath the lever holder fork. But what does a beating rubber do? Well when you lower the lever and let it go, this rubber prevents that the lever fork smashes into the top casting of the lever group. You will find this beating rubber on the...
€11.74

Lever new brewing group cover

This black plastic cover is used with a variety of lever espresso machine groups. This keeps the mechanism clean and you won’t get your fingers stuck in the bearing mechanism. This plastic cover has been manufactured in Italy. This cover can be used for various lever brewing groups such as with the Astoria, the old La Pavoni groups, Wega Antares, Wega...
€23.36

Safety valve 3/8" 2.0 bar CE PED IV certified

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
€10.47

Fiorenzato o ring upper brewing group

A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The upper o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 58,74mm. This specific o...
€4.08

Asco/Sirai pressure switch P303/T01 3 phase 20A

On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...
€88.64

Lever group handle

On this page you will find a plastic handle which goes over a lever brewing group lever. This plastic lever handle can be used with a variety of lever brewing groups such as the ones used with Vibiemme Replica, Astoria Rapallo, La Pavoni Bar, La Pavoni Bart, La Pavoni Pub, Wega Antares, Wega Nova, Victoria Arduino Athena, Brasilia Decurtis AL and so on....
€13.44

Fiorenzato o ring bottom

A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The lower o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 56,75mm. This specific o...
€3.44

Astoria portafilter gasket 66x56x6mm

On this page you will find a portafilter gasket specially suited for lever espresso machine brewing groups. This specific portafilter gasket is suitable for brands such as the Astoria, Pavoni, Wega, Victoria Arduino, Fiorenzato and Brasilia lever groups. (seen they are the same model of group) This specific gasket has been made from NBR. This gasket has a...
€3.18

PTFE gasket 20x17x2mm

PTFE gasket 20x17x2mm. Suitable for:CodeProducer12010 Astoria CMA000466 Aurora-brugnetti000501 Aurora-brugnetti400-215-000 Cimbali400215000 Cimbali401-183-000 Cimbali401-183-010 CimbaliC469900420 Ecm401183000 Faema401183010 Faema4701024558 Faema01539006 Futurmat-Ariete05132808 Futurmat-ArieteISGUATF22172 Isomac...
€1.08

Astoria lever pin

On this page you will find a lever fork pin suitable for brands such as the Astoria and Wega. Note, there are more versions available This blank steel pin (so they do rust) is the link between the lever and the piston shaft. This pin has been knurled on one side, this side also grabs into the brass lever group fork. This lever pin is a OEM/Origina (part...
€20.16

Sirai pressure switch single phase P203/T01 20A

The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover. The P203T01 is a slightly lighter pressure switch. The pressure of this switch can be...
€90.16

Astoria group locking gasket 88x40x2mm

On this page you will find a group locking gasket. This group locking gasket is normally used with most Astoria espresso machine and some Wega machines, so not lever groups. But they are also suitable for the Astoria and Wega lever groups This gasket is made from a fibre material. The outer diameter is 88 mm, the inner diameter is 40mm and the thickness...
€6.97

Astoria back stop

On this page you will find a rubber back stop used with a variety of and newer lever espresso machine brewing groups. You will find this back stop on Astoria and Wega models pre 2001. Currently you can find them on brewing groups used by Bezzera 5473001 , Pavoni 477020, Victoria Arduino 17000018, Wega WY15101 and Brasilia 01431.0.00.02. For Pavoni groups,...
€9.59

Astoria lever group fork

On this page you will find a chrome plated lever group fork for various lever groups. This fork is responsible for transitioning the lever motion to a vertical motion. This chrome plated group fork can’t be used on the older AL lever groups as used by Astoria and Wega. That part is out of production. This specific item is OEM/Original item suitable for...
€74.25

Lever group ball bearing

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...
€6.95

Anti vacuum valve V.A.R. 1/4"

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...
€10.91

A Heritage of Excellence

With roots dating back to 1969, Astoria CMA has established itself as a beacon of excellence in the espresso industry. The company's commitment to quality and innovation shines through in every aspect of their lever-operated machines.

Timeless Design and Precision Engineering

Astoria CMA lever-operated espresso machines are renowned for their timeless design and precision engineering. Crafted with meticulous attention to detail, these machines marry classic aesthetics with modern functionality, resulting in an espresso-making experience that is both elegant and efficient.

Unmatched Control and Flavour

At the heart of every Astoria CMA lever-operated machine lies a sophisticated lever mechanism that provides baristas with unparalleled control over the brewing process. This level of precision allows for the extraction of rich, flavorful espresso shots that are sure to delight even the most discerning coffee aficionados.

Versatility to Suit Every Setting

Whether you're a home barista looking to elevate your coffee game or a professional seeking a reliable workhorse for your café, Astoria CMA lever-operated machines offer versatility to suit every setting. Available in a range of sizes and configurations, these machines are designed to meet the unique needs of any coffee lover or business owner.

Superior Quality Spare Parts and Support

Our store is proud to offer a comprehensive selection of high-quality spare parts for Astoria CMA lever-operated espresso machines. From gaskets and seals to levers and portafilters, we have everything you need to keep your machine running smoothly and producing delicious espresso for years to come. Plus, our team of experts is always on hand to provide assistance and support, ensuring that you get the most out of your Astoria CMA machine.

Conclusion: Elevate Your Espresso Experience with Astoria CMA

In conclusion, Astoria CMA lever-operated espresso machines embody the perfect blend of heritage, craftsmanship, and innovation. Whether you're a seasoned barista or a coffee enthusiast looking to take your brewing skills to the next level, these machines offer an unmatched espresso experience that is sure to impress. Explore our range of Astoria CMA lever-operated machines today and discover the perfect addition to your coffee setup!