Suodata
Price
Kirjoita osa
Filter

Gaggia

Gaggian perintöä tutkimassa: Gagaggia: Lever Espressokoneiden historia

Tervetuloa tutustumaan syvällisesti Gaggiaan, ikoniseen italialaiseen tuotemerkkiin, joka oli vipuhaltimella toimivan espressokoneen uranuurtaja. Tässä kattavassa oppaassa syvennymme Gaggian vipuryhmään kuuluvien espressokoneiden rikkaaseen historiaan niiden vaatimattomista alkuajoista niiden kestävään perintöön kahvimaailmassa.

Gaggia Espresso Machine Parts

Tuotteita yhteensä 77 kpl.

Näytetään 1-36 yht. 77 tuotteesta

La Pavoni Europiccola pre-millenium portafilter tiiviste

On this page you will find a portafilter gasket suitable for various lever brewing groups. This gasket is suitable for pre-millennium groups. The La Pavoni part reference for this item is 2612005 This portafilter gasket has a outer diameter of 60mm a inner diameter of 55mm and a gasket of 5,5mm. This gasket is a square version. This gasket can be used in...
7,68 €

Faema-vipuryhmän jousi 46mmx169mm

The compression spring on this page can be used in various Lever espresso machines. But to start: Always check the dimensions of your original spring. The product on this page has a overall length of 169mm and a outer diameter of 46mm. The compression spring is made from spring steel and has been galvanized. This compression spring can be used on a...
17,21 €

Gaggian tuloputki

This item is a brewing group water inlet tube which is used on various Gaggia C70/C80 brewing groups. This brewing group inlet tube is made from a copper tube which has been bend and flared at the ends. You do need to use this copper tube in combination with a nut. This item has limited availability.
15,47 €

La Pavoni Europiccola ruostumattomasta teräksestä valmistettu ristikko

Is the grid missing of your La Pavoni Europiccola(324021), Professional, Romantica or Gaggia G105(S324021). You can find the replacement grid on this page. To make your lever espresso machine complete again. This item is suitable for the Pre-millenium and millennium la Pavoni lever espresso machines. The grid has been made out of stainless steel and has...
46,25 €

La Pavoni Europiccola tuloputki

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...
20,64 €

La Pavoni Europiccola rei'itetty aluslevy

On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...
4,71 €

Gaggia litteä kumitiiviste

This flat rubber gasket is used on a variety on Gaggia lever brewing groups. This flat gasket is used to seal of the regulator rod on the back of the brewing group. This gasket itself is made from NBR and is made in the Czech Republic.
4,18 €

La Pavoni Europiccola -panimoryhmäholkki

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...
40,65 €

La Pavoni Europiccola seeger sormus

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...
1,38 €

La Pavoni Europiccola akselitiiviste

The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....
7,68 €

Gaggia lever group pinion gear

It is quite common that the pinion gear on the Gaggia lever brewing group needs to be replaced. This can be from various reasons, like breaking or damaging teeth. This pinion gear is used to lower and raise the piston shaft in the brewing group. The shaft itself is installed in between 2 sealed bearings. Note: these shafts are made from steel so they can...
100,96 €

La Pavoni Europiccola kattilan kansi tai rengas

This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...
1,09 €

Pavoni Europiccola post millenium -ryhmäsuihku 54mm

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...
7,67 €

La Pavoni Europiccola -ryhmän tiiviste

The o ring on this page can be used as a seal between the lever brewing group and the water boiler of a variety of La Pavoni domestic lever espresso machine models. The La Pavoni part reference for this item is 465128 This o ring is not suitable for the old models, the ones which screw into the boiler. Besides that you can use this o ring on every group....
3,28 €

Europiccola pohjaton portafilter millenium

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...
52,01 €

La Pavoni Europiccola lämpöelementin tiiviste silikoni

On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...
4,03 €

Gaggia America 1 -ryhmän lämmityselementti

It is quite common that the heating element on the 1 group Gaggia America is broken. Finding the correct heating element for this espresso machine is quite difficult. Seen the espresso machine does have quite a shallow boiler, so a lot of elements won´t fit. This specific model does fit and produces 1200W at 230V. you can also upgrade your single group...
142,62 €

Gaggia-jousiopas

The item on this page is a Gaggia lever brewing group spring guide, this item can be found on the Gaggia C70/C80 brewing groups. The spring guide, keeps the main compression spring centred, has been made from pressed copper. Limited stock available
3,34 €

Gaggia männän akseli

The item on this page is a Gaggia lever group piston shaft. This item is made up out of a gear rack and the bottom coupler. This coupler can be easily disconnected from the piston shaft itself. This coupler can be attached to the stainless steel piston. This item is unfortunately out of production and not available anymore.
174,30 €

Gaggia teräskuulajousi

This compression spring is vital in the lever mechanism used on the old Gaggia lever brewing groups. This spring is installed inside the side of the brewing group, with a small ball bearing on top of it. If this item is missing in your brewing group your brewing group mechanism won’t function properly. This compression spring is unfortunately out of...
9,74 €

La Pavoni Europiccola painekytkin

The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...
18,92 €

La Pavoni Europiccola -ryhmän mäntä

The item on this page is a brass piston for La Pavoni and Gaggia lever espresso machine groups. This piston can be used on pre-millennium and millennium brewing groups. In the period between approx. 1996 and 2006 the pistons were made from Teflon. This idea was discontinued after 2006 and they got back to the brass pistons again. The Gaggia part reference...
55,37 €

Gaggia lever group piston

The product on this page is a stainless steel piston for the Gaggia America and Gaggia Italia lever brewing groups. This piston has been made from 1 piece of stainless steel. The outer diameter of the piston is 50mm and the length is 82mm. The piston has the one way valve already installed. The piston also comes with a stainless steel shower screen with a...
185,33 €

La Pavoni Europiccola 12X17X1mm aluslevy

The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on  various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003  and for Gaggia the reference is S313003  This washer is suitable for Pre-millennium as well for Millennium espresso machines....
5,12 €

La Pavoni Europiccola tasosuoja

The earlier models of the La Pavoni Europiccola already had some sort of a protection to keep the sight glass safe. These sight glass protectors were installed at the same moment that the sight glass was installed. Seen they needed to slide over the sight glass completely. In the 1990ies you get the first models of plastic cover, the stainless-steel cover...
12,51 €

La Pavoni Europiccola ryhmäsuihku 52mm

This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...
8,95 €

Gaggia-mutteri

This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.
8,75 €

Gaggian alkuperä

Vipuohjatun espressokoneen historia alkaa Achille Gaggian vuonna 1948 perustamasta Gaggia-yrityksestä. Ennen yrityksen perustamista Gaggia patentoi itse ensimmäisen mäntämoottorikäyttöisen vipukeitinryhmän ja loi näin perustan nykyaikaiselle espressokoneelle. Vuonna 1948 Gaggia perusti virallisesti yrityksen ja loi pohjan kahvinvalmistustekniikan vallankumoukselle.

Gaggian vipuiset espressokoneet

Gaggian ensimmäinen tuotantomallin vipu-espressokeitin oli Gaggia Classica, joka esiteltiin yrityksen historian alkuvuosina. Sitä seurasi sarja kaupallisia espressokeitinmalleja, kuten Gaggia Esportazione, Gaggia TS, Gaggia Spagna, Gaggia Internazionale ja ikoninen Gaggia America 1950-luvun lopulla. 1960-luvulla Gaggia jatkoi innovointia Gaggia Orionen kaltaisilla malleilla, joista jokainen perustui edeltäjiensä menestykseen.

Gaggian panos kodin espressonvalmistukseen

Kaupallisten espressokoneidensa lisäksi Gaggia kehitti 1950-luvun alussa myös ensimmäisen kotikäyttöön tarkoitetun vipuhaarukan espressokoneen - Gaggia Gilan. Tämä uraauurtava kone toi espressonvalmistuksen taidon kahvinharrastajien koteihin ympäri maailmaa ja tasoitti tietä nykyaikaiselle kodin espressoliikkeelle.

Gaggian vipuryhmän kehitys

Vuosien varrella Gaggian vipuryhmäespressokoneet kokivat useita teknisiä parannuksia ja hienosäätöjä, mutta perusperiaate pysyi samana. Vipuryhmä ja sen mäntämoottorilla toimiva mekanismi tarjosivat ainutlaatuisen ja aidon espressonvalmistuskokemuksen, jota sekä baristat että kahvin ystävät arvostivat.

Gaggia tänään: Gagaggia tänään: Perintö jatkuu

Vaikka Gaggia valmistaa edelleen kaupallisia ja kotitalouksien espressokeittimiä, vipuisten espressokeittimien valmistus on lopetettu. Gaggian vipuryhmäkoneiden perintö elää kuitenkin edelleen, inspiroi uutta kahvinharrastajien sukupolvea ja toimii muistutuksena yrityksen jatkuvasta sitoutumisesta laatuun ja innovaatioon.

Gaggia-vipuryhmän varaosat

Jos olet Gaggian vipuryhmäespressokoneen ylpeä omistaja ja tarvitset varaosia, olet tullut oikeaan paikkaan. Tarjoamme osoitteessa [Your Company Name] kattavan valikoiman Gaggia-vipuryhmän varaosia, mukaan lukien männän tiivisteet, jouset, portafilterin kahvat ja paljon muuta. Aitojen varaosiemme avulla voit pitää Gaggia-espressokoneesi moitteettomana vuosien ajan.

Johtopäätökset: Gaggian perintöä juhlien

Yhteenvetona voidaan todeta, että Gaggian panosta kahvimaailmaan ei voi liioitella. Gaggia on jättänyt alalle lähtemättömän jäljen aina vipukahvilla toimivan espressokeittimen uranuurtajasta kodin espressonvalmistuksen mullistamiseen. Kun juhlimme Gaggian perintöä, kutsumme sinut tutustumaan Gaggia-vipuryhmän varaosavalikoimaamme ja jatkamaan poikkeuksellisen espressonvalmistuksen perinnettä tuleville sukupolville.