Gaggia Factory G105-G106

On this page you will find the heating element gasket, which is an o ring, for the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Stradivari, La Pavoni Romantica and the Gaggia 105-106. This specific gasket is only suitable in combination with the full stainless steel heating elements made by backer. They are not suitable for the earlier brass...

Is the grid missing of your La Pavoni Europiccola(324021), Professional, Romantica or Gaggia G105(S324021). You can find the replacement grid on this page. To make your lever espresso machine complete again. This item is suitable for the Pre-millenium and millennium la Pavoni lever espresso machines. The grid has been made out of stainless steel and has...

It can happen that your old heating element for your La Pavoni Europiccola, La Pavoni Stradivari, La Pavoni Romantica or of your Gaggia 105-106 burns down or get’s a short in it. This specific model heating element gives 1000W at 240V made by the heating element manufacturer Backer. It is a full stainless steel element, so flange and the element. The...

The o ring on this page can be used as a seal between the lever brewing group and the water boiler of a variety of La Pavoni domestic lever espresso machine models. The La Pavoni part reference for this item is 465128 This o ring is not suitable for the old models, the ones which screw into the boiler. Besides that you can use this o ring on every group....

This gasket is one of the few ones which does not need to seal off water. But is used as a gasket between 2 metal surfaces. This gasket can be used on various models of domestic La Pavoni lever espresso machines. The part reference for this item is 362019 This gasket has a outer diameter of 93mm a inner diameter of 80mm and a thickness of 2mm. You can use...

For the La Pavoni Europiccola, Professional and the Romantica there are 2 options to cover the plastic drain tray (371104). The stainless steel drain grid, or the plastic one.  On this page you will find the plastic version. This plastic grid has a horizontal grid pattern, instead of the metal one with a hole pattern. The plastic type of grid was...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Stradivari. But also on the Domestic Gaggia lever brewing groups. The Gaggia part...

The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on  various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003  and for Gaggia the reference is S313003  This washer is suitable for Pre-millennium as well for Millennium espresso machines....

The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....

The item on this product page is a brass washer which can be used on various domestic La Pavoni and Gaggia Lever espresso machines. This includes pre-millennium and Millennium brewing group models. This washer is used in the steam valve. This washer spreads the force equally over the shaft gasket. There are 2 washers installed in each valve. The Gaggia...

This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...

The earlier models of the La Pavoni Europiccola already had some sort of a protection to keep the sight glass safe. These sight glass protectors were installed at the same moment that the sight glass was installed. Seen they needed to slide over the sight glass completely. In the 1990ies you get the first models of plastic cover, the stainless-steel cover...

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...

The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021.  This...

This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...

The item on this product page is a OEM/original La Pavoni spare part. This chrome nut is used on top of various domestic lever brewing groups made by La Pavoni. This nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3135014. This nut has on the inside a M10 thread. The outer key size...

La Pavoni Europiccola complete group pistonReturn to the  Pavoni Europiccola group parts overview

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

The newer model of la Pavoni Europiccola and all the models of the Pavoni Professional use a modern pressure switch.  Currently those are the Ma-ter Echo pressure switches. Seen these can’t be installed directly into the heating element (the pressure switch would stick out the bottom off the base). For this problem they have found a solution. In the...

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...

The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R  The portafilter is a...

The La Pavoni (and Gaggia) plastic drain tray (371104) is used on a variety of models like the La Pavoni Europiccola, La Pavoni Professional, La Pavoni Romantica and finally On the Gaggia 105(S371104). The plastic drain tray hasn’t been there from the beginning. The first la Pavoni’s had a flat surface where you needed to put your coffee cup. Later on,...

It is always possible that your old heating element for your La Pavoni Europiccola, La Pavoni Romantica, La Pavoni Stradivari or your Gaggia 105 burns or gets a short. The other option is that you purchased a old model La Pavoni Europiccola and you want to convert your classic lever espresso machine to a proper 120V version. This model of heating element...

The item on this page is a brass piston for La Pavoni and Gaggia lever espresso machine groups. This piston can be used on pre-millennium and millennium brewing groups. In the period between approx. 1996 and 2006 the pistons were made from Teflon. This idea was discontinued after 2006 and they got back to the brass pistons again. The Gaggia part reference...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a pressure switch manufactured by the Italian company Ma-ter. The La Pavoni part reference for this item is 451308. This pressure switch had been pre-set at 0,8 bar, but the pressure range goes from 0,5 up to 1,2 bar. The fitting used is a male ¼” BSP-G. The microswitch on...

This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...

The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...

The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...

The item on this product page is a shaft gasket for the steam valve on various domestic La Pavoni and Gaggia lever espresso machines. This gasket seals off the shaft from the boiler. This shaft gasket can be used on Millennium and Pre-Millennium models. The part reference for La Pavoni is 361023 and for Gaggia it is S361023. This gasket has been made from...

On this page you will find a portafilter gasket suitable for various lever brewing groups. This gasket is suitable for pre-millennium groups. The La Pavoni part reference for this item is 2612005 This portafilter gasket has a outer diameter of 60mm a inner diameter of 55mm and a gasket of 5,5mm. This gasket is a square version. This gasket can be used in...

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a stuffing nut for the steam valve. This nut keep pressure on the shaft gasket. Because the gasket gets a constant pressure there won’t be a leak at the steam shaft. The La Pavoni part reference for this item is 3124014. This item is suitable for as well pre-millennium as...

On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...