Suodata
Price
Kirjoita osa
more... less
Filter

Astoria

Tutustu Astoria CMA-vipukäyttöisten espressokoneiden käsityötaitoon

Tervetuloa tutustumaan Astoria CMA:n hienoihin vipukäyttöisiin espressokoneisiin. Tässä oppaassa syvennymme rikkaaseen historiaan, ylivoimaiseen käsityötaitoon ja innovatiivisiin ominaisuuksiin, jotka määrittelevät nämä ikoniset kahvinkeitto-ihmeet.

Astoria lever espresso machine parts

Tuotteita yhteensä 84 kpl.

Näytetään 1-36 yht. 84 tuotteesta

Varoventtiili 3/8" 2,0 bar CE PED IV sertifioitu

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
10,47 €

Messinkimutteri M3

The nut on this page is a M3 nut made from brass. You will find this type of nut on variety of steam and water valves of  Astoria and Wega espresso machines. The Astoria part reference for this item is 23050 and the Wega part reference is WY23050. This brass nut has a metric female thread of M3. The nut has made according to specifications of UNI 5587 and...
0,86 €

Astoria haarukanvarren pylväs 2001

On this product page you will find the connection between the lever and the lever group itself. In the top of this casted item you will screw the lever itself.  There are 2 holes. 1 of them has a bushing inside so that there is some axial movement possible. In the fixed hole goes the bearing shaft. In the movable hole goes a pin to make a connection with...
102,41 €

Astoria pohjaton portasuodatin

The bottomless portafilter on this product page can be used on a variety of Astoria espresso machines. The Astoria part reference number for this item is 27311004.  The portafilter has a ear orientation of 45 degree, the ear thickness is 6mm. The portafilter does come with a double filter basket and stainless steel spring. This portafilter is made in...
60,39 €

Vipuryhmän kuulalaakeri

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...
6,95 €

Laakerin pidikkeen tappi

On this product page you will find the bearing pin used in a variety of lever espresso machines, such as Astoria, Wega, Pavoni and Brasilia. This pin has a knurled middle piece. On that location the chrome plated lever fork will be installed to. And next to that you will get 2 bearings. These are secured with 2 shaft clips. This item is OEM/Original...
21,76 €

Astorian etupysäkki

On this page you will find the front stop for various lever brewing groups. This front stop make sure tha you don’t damage the lever nor the castings of the brewing group itself. This rubber front stop can be used with brands such as Brasilia with part number 01432.0.00.02 , La Pavoni 477021 and Victoria Arduino 17000018 . For La Pavoni it is only...
21,76 €

Faema E61 lämmityselementti 57x43x3mm

Tällä sivulla löydät lämmityselementin, jonka olimme valmistaneet AFM34:stä elintarviketurvallisen kuitumateriaalin, joka on valmistettu Saksassa. Tämän lämmityselementin halkaisija on 57 mm sisäinen halkaisija 43 mm ja paksuus 3 mm. Tätä lämmityselementtiä voidaan käyttää useissa lämmityselementeissä, kuten Faema E61, Faema E61 Legend, Faema E61 Jubile,...
4,45 €

Astoria-vipuryhmähaarukka

On this page you will find a chrome plated lever group fork for various lever groups. This fork is responsible for transitioning the lever motion to a vertical motion. This chrome plated group fork can’t be used on the older AL lever groups as used by Astoria and Wega. That part is out of production. This specific item is OEM/Original item suitable for...
74,25 €

Astoria and wega level glass cover painted white

On this page you will find a body part suitable for espresso machines made by the Italian company Astoria CMA. This piece of pressed metal goes behind the sight glass to make the water level more visible. This item can be used on Astoria and Wega espresso machines. The Astoria part number is 44002 and the Wega part number is WY44002. This OEM/Original...
13,95 €

Vivun männän tiiviste 52x40x7mm

On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...
5,20 €

Silicone piston gasket 52x40x7mm

This type of piston gasket is one of the most used models in the lever espresso machine world. But this one is different. Yes the dimensions are the same 52x40x7mm but the material is different then with the standard piston gaskets. They are made from clear silicone. This will make them last a lot longer then the standard ones made from NBR. The type of...
3,97 €

Vipuryhmäholkki

On this page you will find the inner liner for a brewing group. This inner liner is used with a variety of espresso machine brands. This brass liner is pushed into place. It will be sealed off with 2 o ring, a bottom and a top o ring. To remove this liner it’s basically installation but the other way around. You can find this liner in a variety of lever...
254,88 €

Astoria/Wega water level nut 1/2" 12mm

This page shows the water level nut for a Astoria and Wega sight glass. This nut makes sure that the sight glass stays in place and seals properly. If the nut is screwed down the sight glass seal will slightly compress and seal off the sight glass. The part number for this item is for Astoria is 25383 and for Wega WY25383  This sight glass nut has a...
8,38 €

Suihku 57 mm

Vipun panimoryhmä käyttää hieman eri osia, sitten normaali pumpun ajama espressokone. Tämä on sama juttu käytettyjen suihkujen kohdalla. Tämä italialaisen IMS Filtri -yhtiön tekemä suihkuruutu on tästä esimerkki. Tämä suihkunäytös kietoutuu panimoryhmän hihnan ympäri pitääkseen sen paikoillaan. Tämän suihkunäytön ulompi halkaisija on 57 mm Tämä suihku on...
12,79 €

Fiorenzato tai renkaan pohja

A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The lower o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 56,75mm. This specific o...
3,44 €

Astoria heating element 2 group 3700W 220V

The heating element on this page is quite a big model, which goes over 500mm. This specific heating element is made for Astoria and Wega espresso machine models with 3 brewing groups. This heating element is listed with Astoria under 17101 and with Wega the part number is WY17101  This heating element produces 3700W at 230/240V. The heating element has 4...
105,17 €

Asco/Sirai painekytkin P303/T01 3-vaiheinen 20A

On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...
88,64 €

Astorian takapysäkki

On this page you will find a rubber back stop used with a variety of and newer lever espresso machine brewing groups. You will find this back stop on Astoria and Wega models pre 2001. Currently you can find them on brewing groups used by Bezzera 5473001 , Pavoni 477020, Victoria Arduino 17000018, Wega WY15101 and Brasilia 01431.0.00.02. For Pavoni groups,...
9,59 €

Huippuosaamisen perintö

Astoria CMA:n juuret ulottuvat vuoteen 1969, ja se on vakiinnuttanut asemansa espressoteollisuuden huippuosaamisen merkkipaaluna. Yrityksen sitoutuminen laatuun ja innovaatioihin näkyy kaikissa sen vipukäyttöisissä koneissa.

Ajatonta muotoilua ja tarkkaa suunnittelua

Astoria CMA:n vipukäyttöiset espressokeittimet ovat tunnettuja ajattomasta muotoilusta ja tarkasta suunnittelusta. Yksityiskohtiin kiinnitetyn huolellisen huomion avulla valmistetut koneet yhdistävät klassisen estetiikan ja modernin toiminnallisuuden, ja tuloksena on espressonvalmistuskokemus, joka on sekä tyylikäs että tehokas.

Verraton hallinta ja maku

Jokaisen Astoria CMA-vipukäyttöisen koneen ytimessä on hienostunut vipumekanismi, joka tarjoaa baristalle vertaansa vailla olevan kontrollin valmistuksen suhteen. Tämä tarkkuus mahdollistaa täyteläisten, maukkaiden espressopursotusten valmistamisen, jotka varmasti ilahduttavat vaativimpia kahvin ystäviä.

Monipuolisuutta jokaiseen ympäristöön

Olitpa sitten kotibarista, joka haluaa kohottaa kahvipelinsä, tai ammattilainen, joka etsii kahvilaansa luotettavaa työjuhtaa, Astoria CMA-vipukäyttöiset koneet tarjoavat monipuolisuutta jokaiseen ympäristöön. Näitä koneita on saatavana eri kokoja ja kokoonpanoja, ja ne on suunniteltu vastaamaan jokaisen kahvinystävän tai yrityksen omistajan yksilöllisiin tarpeisiin.

Korkealaatuiset varaosat ja tuki

Myymälämme tarjoaa ylpeänä kattavan valikoiman laadukkaita varaosia Astoria CMA-vipukäyttöisiin espressokoneisiin. Tiivisteistä ja tiivisteistä vipuihin ja portafilttereihin, meillä on kaikki, mitä tarvitset pitämään koneesi moitteettomana ja tuottamaan herkullista espressoa vuosien ajan. Lisäksi asiantuntijatiimimme on aina valmiina tarjoamaan apua ja tukea, jotta saat kaiken mahdollisen irti Astoria CMA-koneestasi.

Johtopäätökset: Astoria CMA:n avulla: Paranna espressokokemustasi

Yhteenvetona voidaan todeta, että Astoria CMA-vipukäyttöiset espressokoneet ilmentävät täydellistä yhdistelmää perintöä, käsityötaitoa ja innovaatiota. Olitpa sitten kokenut barista tai kahviharrastaja, joka haluaa nostaa keittotaitosi seuraavalle tasolle, nämä koneet tarjoavat vertaansa vailla olevan espressokokemuksen, joka tekee varmasti vaikutuksen. Tutustu Astoria CMA-vipukoneiden valikoimaan jo tänään ja löydä täydellinen lisä kahviasennukseesi!