La Pavoni Europiccola - Panimoryhmä

The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...

The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...

The item on this product page is a OEM/original La Pavoni spare part. This chrome nut is used on top of various domestic lever brewing groups made by La Pavoni. This nut can be used on pre-millennium as well as millennium espresso machines. The La Pavoni part reference for this item is 3135014. This nut has on the inside a M10 thread. The outer key size...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millennium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The Gaggia part reference for this item is S395307 and for La Pavoni the...

The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R  The portafilter is a...

The item on this page is a OEM/Original La Pavoni spare part. This item is the lever of the lever brewing group. This item is compatible with a lot of pre-millennium as well as millennium brewing groups. This lever can be used on various domestic La Pavoni and Gaggia lever espresso machines. The La Pavoni part reference for this item is 3954004 and for...

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

On this page you will find a portafilter gasket suitable for various lever brewing groups. This gasket is suitable for pre-millennium groups. The La Pavoni part reference for this item is 2612005 This portafilter gasket has a outer diameter of 60mm a inner diameter of 55mm and a gasket of 5,5mm. This gasket is a square version. This gasket can be used in...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Stradivari. But also on the Domestic Gaggia lever brewing groups. The Gaggia part...

On this product page you can find the portafilter one of the most iconic lever espresso machines. The La Pavoni home lever espresso machine. This portafilter can be used for a variety of Pre-millennium la Pavoni espresso machines. Such as the La Pavoni Europiccola, La Pavoni Mignon and the La Pavoni Professional. This portafilter is a double portafilter,...

If have a wreck of a la Pavoni Europiccola lever espresso machine or you want to give your La Pavoni Mignon a complete overhaul. This set would be ideal for you. This set made for la Pavoni espresso machines with a pre-millennium brewing group. This is a generic set, so it is possible that not all parts apply to your pre-millennium espresso machine....

On this product page you can find the pre-millennium single filterbasket for the La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. This filterbasket has a outer diameter of 58mm and a height of 22mm. This filterbasket can hold around 6 grams of ground...

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

The filterbasket on this page is a 2 cup filterbasket made out of stainless steel. This specific model of filterbasket is suitable for La Pavoni post millennium lever brewing groups. The pre-millennium filter baskets won’t fit. The double filterbasket has a outer edge of 60mm and a height of 25mm. This filterbasket can hold approximately 12 grams of...

La Pavoni Europiccola water level plug

The item on this product page is a OEM/Original La Pavoni spare part. This item is a complete steam valve for various domestic La Pavoni lever espresso machines. This steam valve can be used on Millennium as well on late models of the pre-millennium La Pavoni’s. This steam valve can only be used in combination with the steam tube with bayonet fitting. The...

The 2 coffee filterbasket on this page is suitable for pre-Millennium La Pavoni Lever espresso machines. The La Pavoni part reference for this item is 327051. The IMS part reference for this item is PA2T101/H24/LF This double filterbasket on this page has a outer diameter of 58mm and a height of 24,5mm. This filter basket can hold about 12 grams of ground...

Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...

This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You will find that type of brewing group on la Pavoni lever espresso machines such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The La Pavoni part reference for this item...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. For La Pavoni the part reference is 395307R, this reference is only there...

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...

Originally you would only find a boiler pressure manometer on the La Pavoni Professional espresso machines. This boiler pressure manometer is mounted on the top sight glass fitting. If you want to convert your La Pavoni Europiccola and fit it with a Pressure gauge, this is the kit you need The sight glass fittings used to have a internal diameter of...

Do you want to go a step further as a home barista with your La Pavoni Lever espresso machine? Then replacing your stock shower screen on your la Pavoni with a pre-millenium brewing group could be one of the first steps. This precision shower is manufactured in Italy by the most famous shower screen and filter basket manufacturers in the world IMS...

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...

The steam tube on this product page is a OEM/Original La Pavoni product. This steam tube is used on various late model pre-millennium as well as millennium lever espresso machines. The La Pavoni part reference for this item is 3432374  This steam tube is installed with a bayonet fitting.  So there are no tools required. This chrome plated steam tube does...

On this product page you will find our own produces piston gaskets suitable for a variety of la Pavoni models such as the La Pavoni Europiccola La Pavoni Professional, La Pavoni Stradivari, La Pavoni Mignon, Gaggia 105 lever groups and so on. The Gaggia part reference for this item is S361005, for La Pavoni the part reference is 361005. These gaskets are...

The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021.  This...

La Pavoni portafilter gasket 60x50x5,5mm. Only suitable for Millenium machines

The item on this page is a brass piston for La Pavoni and Gaggia lever espresso machine groups. This piston can be used on pre-millennium and millennium brewing groups. In the period between approx. 1996 and 2006 the pistons were made from Teflon. This idea was discontinued after 2006 and they got back to the brass pistons again. The Gaggia part reference...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

The item on this product page is a OEM/Original La Pavoni valve nut. This nut is used with various domestic lever espresso machines La Pavoni has made in the past. You can use this brass nut on La Pavoni models as well as Millennium as Pre-Millennium. The part reference for this item is for La Pavoni 313525 and for Gaggia S313525. This brass nut is used...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...