Etusivulle

These machine feet are used on the Faema E61 Legend and the Faema E61 Jubilee. They can be used on the front left as the front right feet, which have both the part number 3515-135 856. These feet do come with the rubber insert 4991-136 040 These feet are made from polished aluminium. The top section has a diameter of 35mm and the bottom section has a...

The gasket on this product page is a PTFE flat gasket which can be used on various applications such as boiler gaskets, water inlet gaskets and steam and water valves. This gasket is used on brands such as San Remo, La Scala, Grimac, Nuova Simonelli, Victoria Arduino and Gaggia. This gasket has been made from PTFE. The outer diameter is 18mm the inner...

Victoria Arduino Supervat front lever stop. This stainless steel stop is a replacement for the original stop. This stop opens the brewing group valve.Back to the Victoria Arduino Supervat parts overview

La Pavoni lever pinReturn to the La Pavoni P-90/P-91/P-1/P-3 lever group parts overview

La Cimbali Liberty microcimbali piston cap o ring

La Cimbali Liberty microcimbali piston cap o ring

La San Marco inox brewing group rodReturn to the La San Marco parts overview

This style of flange pump is mainly used on espresso machines of the La Cimbali Group. You can find these pumps on the brands La Cimbali, Faema and Casadio. The Cimbali part references are 2241130177 and 2241-130-177, for Faema they are 1441132497, 2241130177 and 462992000.    This fluid o tech pump has a flange connection. This type of flange connection...

La Cimbali HX gasket silicone 50,8x3,53mm. the gasket is located inbetween the brewing group and the HX 150mm or the HX 210mm. And is compressed when you tighten the group bolts.Return to the La Cimbali M20 lever group overview

The portafilter gasket on this product can be used on various lever espresso machines. On brands such as Fiorenzato and Vibiemme. The Fiorenzato part reference number is A1200194  and the Vibiemme part reference number is GUARSOTPISTON. This portafilter gasket has a outer diameter of 65,5mm a inner diameter of 55,5mm and a thickness of 5,5mm. This gasket...

Rancilio flat gasket OR 18x12x3m

Filter ring o ring 53,34X5,33mm

This specific type of switch is used for the La Pavoni Romantica, La Pavoni Europiccola for the configurations ERG, ELH, EL and EN. The part number for the La Pavoni is 435063.But this model of switch is also used on the Gaggia Factory 105 (S435063) This specific model red bipolar switch is a rocker switch with a pilot light. The mounting hole for this...

The water level fitting on this page can be used on various Brasilia espresso machine models. The Brasilia part reference number for this item are 00024.0.00.04 and 00024.0.00.04  This casted brass sight glass fitting has on the machine side a male 3/8” BSP-G thread, on water level side a female 3/8” BSP-G and on the bottom/top a female ¼” BSP-G thread....

On this product page you will find the connection between the lever and the lever group itself. In the top of this casted item you will screw the lever itself.  There are 2 holes. 1 of them has a bushing inside so that there is some axial movement possible. In the fixed hole goes the bearing shaft. In the movable hole goes a pin to make a connection with...

La San Marco group ball bearingReturn to the La San Marco parts overview

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or X gasket. The X gasket is in almost all the cases the lower piston gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 50mm, the inner diameter is 38mm and...

The heating element gasket on this page can be used on a variety of Bezzera espresso machine heating elements. The Bezzera part reference number for this item is 5492006 This gasket has a outer diameter of 76mm a inner diameter of 40mm and a thickness of 2mm. The material used is a fibre material. The Bezzera models you can use this on are the Bezzera...

This item is the top section of the lever mechanism used on the Conti lever brewing groups. The Conti part reference on this item is 201800  This chrome plated lever group fork is used to transfer the pulling motion of the lever to a vertical movement. That of the piston. This item has been made from chrome plated brass. This item is available on...

The portafilter on this product page is a 2 coffee portafilter which can be used on the Conti lever espresso machine groups, as well as the regular solenoid valve operated brewing groups. The filter holder body has the Conti part reference number 4056791. The portafilter has a ear orientation of 90 degree, with a thickness of the ears of 7,5mm. This...

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...

Tämän sivun kohta on naaras. Tätä naaraslaastaria voidaan käyttää erilaisissa espressokonesovelluksissa. Voit käyttää tätä sisustusta kytkeä miesten lanka, älä unohda tilata tiiviste tai lanka sealant!Sisällä on 1/8" BSP-G-lanka. Sovellus on valmistettu vaskista. Joissakin tapauksissa on mahdollista, että saat nikkelin ladatun tuotteen, tämä ei ole aina...

La Pavoni sight glass 106x12mm red line

On this page you will find a lever piston gasket. This gasket size is one of the most commonly used size in lever espresso machines. This piston gasket has a outer diameter of 52mm a inner diameter of 40mm and a height of 7mm. The gasket itself has been made from NBR. You can use this gasket with lever brewing groups made by the brands Astoria, La...

Faema E61 2 ryhmän espressokone. Kone on irrotettu, kehys on ammuttu ja päällystetty mustaksi. Kaikki kromipitoiset osat on jaettu kahteen mustaan ja yhden tyyppiseen punaiseen. Koneen kannopiaan valitsimme mustan. Niissä osissa, jotka on puhdistettava helposti, kuten panimoryhmät tippuvat, käytimme sileää mustaa väriä.Kannopian osiin käytimme...

L fitting 1/4" FF

Astoria Wega valve nut

This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...

La Cimbali Piston axle. This axle connects the fork lever of the group with the piston shaft. On the outsides of the la cimbali piston axle there are 2 bearings to make the pull action smoother.

Brass nipple 1/4"M x 3/8"M BSP-GTakaisin meidänSopivaYleiskatsaus

The item on this product page is a non return valve used on various La Cimbali and Faema espresso machine models.  The part references of this non return valve are for Faema and Cimbali 958231000. This non return valve is used in the water inlet tap. The body has a diameter of 13,9mm and has a total length of 18,2mm. The valve does not come with the...

Faema E61: n flange-näkölasit Onko sinulla pieni vuoto jossakin kattilassa? Tämä voidaan korjata helposti korvaamalla vuotava lippu. Tason vieressä tarjoamme myösLämmityselementti Flange. TakaisinFaema E61 kattila Yleiskatsaus

Tämä EPDM-kaasu on yksi yleisimmin käytetyistä polttoainekokoista. Tämän tiivisteen halkaisija on 15,5 mm sisäinen halkaisijaltaan 7,5 mm ja paksuus 4 mm.Tätä tiivistettä voidaan käyttää eri sovelluksissa vanhojen Faema Lever -espressokoneiden kanssa. kuten tiivistys venttiilin akseleiden sulkemiseen. Mutta löydät tämän tiivisteen Faema E61: stä ja...

The item on this product page is a OEM/Original La Pavoni spare part. This item is a complete steam valve for various domestic La Pavoni lever espresso machines. This steam valve can be used on Millennium as well on late models of the pre-millennium La Pavoni’s. This steam valve can only be used in combination with the steam tube with bayonet fitting. The...

Tässä tuotesivulla näkyvä pieni vipu on ohjausvipu Faema E61 -espressokoneiden panimoprosessin aloittamiseen ja lopettamiseen. Faema-osan viittaus tähän kohtaan on 28136651Tämä tuote on valmistettu alumiini. Asennettu pieni rulla on valmistettu prossista ja kiinnitetty prossiveitellä. Tämä kontrollivipu ei tule Bakelite tai muovi koputus. Tämä on tehty...

La Cimbali teflon holder, keeps the ball bearing on it's right location.Return to the La Cimbali lever parts overview