Etusivulle

La Cimbali PTFE gasket. the gaskets seals off the closing nut at the top of the brewing group.return to the La Cimbali overview page

La Pavoni bearing rollerReturn to the La Pavoni Bar modern parts overview

La San Marco non return valveReturn to the La San Marco parts overview

On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...

The item on this product page is a steam and water valve elastic washer, used on various Brasilia espresso machines. The Brasilia part reference number for this item 01286.0.00.03  These washers are used in a pair in combination with the articulating valve screw, which is used on the steam and water valves. You can use these washers on the Brasilia...

Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...

On this page you will find the lever fork for various lever brewing groups. One of the holes is for the bearing pin hole and the other one is for transferring the puling motion to the vertical spring motion. This specific lever fork is specifically for lever groups which are pre-2001 lever brewing groups. This item is out of production and not available...

This rubber o ring is used on the Gaggia brewing groups C70/C80 and is used on the flange side of the brewing group. This o ring is made from EPDM and has a cord diameter of 1,78mm and a internal diameter of 25,12mm. This o ring is made in Italy.

On this page you will find a chrome plated lever group fork for various lever groups. This fork is responsible for transitioning the lever motion to a vertical motion. This chrome plated group fork can’t be used on the older AL lever groups as used by Astoria and Wega. That part is out of production. This specific item is OEM/Original item suitable for...

Vibiemme Filterholder gasket 65.5x55.5x5.5mm originalFor lever group

The o rings used on this product page are the La Carimali piston o rings. Every piston uses in total 3 o rings to seal off the group. This o ring is made from EPDM. The cord diameter is 5,3mm and the inner diameter of the ring is 40,64mm. This item is made in Italy.

The sight glass on this page can be used on various domestic La Pavoni and Gaggia lever espresso machines. this level glass can be used on various versions of the pre-millennium Pavoni espresso machines as well on all millennium espresso machine models. The Gaggia part reference is S453101 and the Pavoni part reference is 453101. This sight glass has a...

Vibiemme upper sleeve

 Vibiemme heating element 1800W 230V 1"1/4 Type Thread 1 1/4"watt 1800volt 230length (mm) 140

On this page you will find a retaining ring which is suitable for shaft diameter of 7mm. This Seeger ring is used with a variety of espresso machine brands like Bezzera, San Marco, Spaziale and Rancilio. As mentioned earlier this is a 7mm retaining ring. This ring has a external diameter of 14,3mm and a thickness of 0,9mm. The ring has been made according...

Victoria Arduino OEM 40900001 Boiler-Pump Pressure Gauge on aito kaksiskaalainen painemittari, joka on suunniteltu valvomaan sekä kattilan painetta että pumpun painetta Victoria Arduino -espressokoneissa. Selkeä kaksoiskaala mittarissa on alueet 0–2.5 bar ja 0–16 bar, ja tämä laadukas mittari varmistaa tarkat painelukemat optimaalista uutto- ja...

Gaggia italia gasket and shim set. This set contains 4 inox shims and 4 v piston seals

La Pavoni heating element gasket. 67x67 mm, int. hole dia 40mm, 3 holes

Portafilter gasket Internal diameter (mm) 56External diameter (mm) 72Height (mm) 8,5

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or X gasket. The X gasket is in almost all the cases the lower piston gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 50mm, the inner diameter is 38mm and...

La Cimbali HX gasket silicone 50,8x3,53mm. the gasket is located inbetween the brewing group and the HX 150mm or the HX 210mm. And is compressed when you tighten the group bolts.Return to the La Cimbali M20 lever group overview

Rancilio flat gasket 11x3.6x2mm

The 2 coffee filterbasket on this page can be used a big variety of espresso machine brands. You can use this basket on brands such as Casadio, Brugnetti, ECM Heidelberg, San Remo, Faema, Vibiemme, La Scala, Grimnac. This filterbasket has been made by the Italian company IMS Filtri. The IMS part reference is CF2T068. Note: this is not a competition...

Crushable copper washer 22x16x3mm

3 phase safety thermostat 169-18°. Suitable for:CodeProducer20300015 Astoria CMA56302101 Astoria CMA7434001 Bezzera95.01594 Carimali531-193-100 Cimbali02790035 Elektra3231133006 Faema3231135058 Faema531193100 FaemaA1400032 Fiorenzato C.s.0746906 Futurmat-Ariete07476906 Futurmat-Ariete10065832 Lavazza10067254...

Korvaa La Cimbali -näkölasin 12x135mm. Jos korvaat näkölasin, se voi olla kätevä korvata ylä- ja alaosan.sinettiäestää vuotamisen.La Cimbali M15, La Cimbali Rubino ja La Cimbali Gran Luce. TakaisinLa Cimbali -vivun osat Yleiskatsaus

Pieni ruostumaton teräspesukone löytyy erilaisista Faema espressokonemallit, jotka käyttävät E61-tyyppistä höyry-/vesiventtiiliä. Faema-osan viittaukset tähän kohtaan ovat: 4041136008 ja 4054043101Tätä pesukonetta käytetään venttiilin akselin ja tap-pyöräytyksen välillä. Tämä ruostumaton teräspesukone on ulkoinen halkaisijaltaan 9mm ja sisäinen...

This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...

Piston gasket V shape 52x37x7.5mm

On this product page you will find a Bezzera Strega support lever group compression spring. This item is a OEM/Original spare part from Bezzera. The part reference for this item is 5471538  This stainless steel compression spring has a length of 78mm and a outer diameter of 28mm. Dit is not the main brewing group lever spring. That is a spring which is...

Faema E61 ei palauta venttiiliä Sivulippu ruuvitaan pääkehoon.Jos haluat täydentää osan seuraavat osat:Faema E61 Spring Non Return Valve;O Ring EPDM 8 9x1,9 mm;Näyttelijä E61 Pieni ei-palautettu ValveTakaisinFaema E61 venttiilit Yleiskatsaus

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni pre-millenium brewing groups. You will find that type of brewing group on la Pavoni lever espresso machines such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The La Pavoni part reference for this item...

Gudgeon pin lever group

Faema Double portafilter with shiny handle

Cimbali inox seeger ringe

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...