the portafilter gasket on this page is a OEM/Original Bezzera spare part. The Bezzera spare part reference for this item is 7493008. This item is dimension wise and optically the same as the portafilter gasket as in the accessory tab below. But what is the difference. This gasket has a shore number of 90 and the other gasket has a shore number of 75. The...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. This specific welding cap is used with a 8x1mm copper tube. The welding end nut used with this end cap is a 3/8”BSP-G with a internal diameter of...

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

Connecting wire per 5m blue. made from silicone with fiberglass mantle. section 2,5mm2 (13AWG)

Brass half nut 1/2" BSP-G 6mm Return to our fitting overview

This chrome plated drain valve is used on a variety of espresso machine brands and models which use the E61 style brewing group. The item has a overall length of 26mm and a male thread of ½”. The drain fitting holds the drain jet in place, this part is used a spring support for the drain valve spring. This coffee machine part for the E61 style group is...

Brass nut 1/2" BSP-G for 14mm welding capReturn the nut overview page

Gaggia Italcrem group locking gasket

This item is the nut installed on the top of the piston shaft on various Gaggia lever espresso machines. With this you can fixate the bottom nut. This item is unfortunately out of production and won’t be made anymore.

The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...

The rotary vane pump on this page is slightly different then a normal rotary vane pump. This specific model is made by Procon in Ireland. (CO1309BF and 131A060F123B) with a NSF certification The model pump is a clamp on rotary vane pump. The flanges of the pump and motor are pushed against each other and a stainless steel clamp is placed over it and...

La Cimbali Microcimbali liberty piston shaft v gasket

The crushable copper gasket on this page can be used with various applications on Brasilia espresso machines.  For instance, on sealing off steam and water tubes and as a gasket on various boiler fitting applications. The Brasilia part reference for this item is 01386.0.00.02  This copper gasket has a outer diameter of 23mm a inner diameter of 17mm and a...

Gaggia portafilter supplement

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

On this product page you will find a complete E61 style brewing group. There are a variety of E61 style brewing groups. Examples of this are the Solenoid valve groups, with the solenoid valve at the bottom, or on the sides. This E61 style brewing group can be used on Fiorenzato, Grimac and La Scala espresso machines. The Fiorenzato part reference fort his...

The item on this product page is a steam and water valve screw, used on various Brasilia espresso machines. The Brasilia part reference number for this item 00107.4.00.04  This articulating valve screw is used in combination with the spring washers and the conical PTFE gaskets to seal off the valve. This item has been made in Italy. You can use these...

Rancilio steam valve knob

La Pavoni rubber ringReturn to the La Pavoni lever group parts overview

Astoria Wega steam water valve body

The fitting on this page is the top fitting on almost every E61 brewing group. You can find the male stop on brands such as Vibiemme, La Scala, Bezzera, Grimac, Faema, La Pavoni, Wega and Brasilia espresso machines. This male cap has a diameter of 16mm. It has been made from brass and has been nickel and chrome plated. The thread used is a 3/8” BSP-G...

The item on this product page is a OEM/Original Bezzera spare part. This item is a manual water inlet valve, which has the Bezzera part reference number 5964055. This valve can comes assembled and complete, so it is ready to install right away. You can use this water inlet valve on the various Bezzera lever operated espresso machines. Such as the Bezzera...

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This can be used on various applications in a espresso...

Anti vacuum valve 1/4".

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 50 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

The double bipolar switch you see on this page can be used on the La Pavoni Europiccola domestic lever espresso machine. The La Pavoni part reference for this item is 435059. This switch can be used on Pre-millennium as well as millennium models. This double bipolar switch has been rated up to 16A at 250V. On the red switch is 0 an 1 been silk printed. On...

Astoria heating element 4500W 230/380V L 310mmType                       flangedwatt 4500volt                      230/400length (mm) 310

This sight glass is suitable for the Elektra Microcasa lever espresso machine. With this sight glass you are able to see if there is enough water inside the boiler. The part reference for this sight glass is 00141035. This sight glass has a outer diameter of 9mm and a length of 147mm.

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

La Pavoni safety valve M22 code 395221G

On this page you will find the Faema lever back bumper. This rubber piece dampens the return of the lever into it’s resting position. Over time this rubber get’s damages or perishes. You can use this bumper on all Faema lever brewing groups like the ones on the Faema Marte, Faema Mercurio, Faema Zodiac, Faema President, Faema Urania and the Faema Lambro.

Level probe 1/4 125mm

On this product page you will find a brass welding cap. These welding caps are soldered to the ends of copper tubes in combination with a welding nut. This round surface seals off when the nut it tightened. The brass material compresses and this seals off the valve. At some point this seal will leak. This is the biggest size of welding fitting you can...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 49,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

This o ring is used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 465204. This o ring has been made from EPDM. The cord diameter is 3,53mm and the internal diameter is 28,17mm. This o ring has been made in Italy. You can use this on Millennium and Pre-Millennium La Pavoni models such as the La Pavoni...

On this page you will find a heating element used in Vibiemme(ELETRESD80022) espresso machines. To be precise in the dual boiler of the Vibiemme Replica and Vibiemme Chimaera. But it also used in the domestic espresso machine the Vibiemme Domobar Super. This specific heating element produces 800W with 230V on 50/60Hz. The element has 2 connections both...