Aurora Brugnetti - spare parts

The boiler gasket on this product page can be used on various Aurora Brugnetti espresso machines. The Brugnetti part reference for this item is 000458A. The gasket is made from a universal gasket material. The outer diameter of this gasket is 210mm the inner diameter is 150mm and the thickness is 3mm. This gasket has been made in Italy.

The item on this product page is a group locking gasket for various Aurora Brugnetti brewing groups. As well as the old lever ones as well for the new solenoid valve operated groups. The Brugnetti part reference number for this item is 000460. This gasket is made from a fibre material. The outer diameter is 78mm, the inner diameter is 42mm and thickness...

On this product page you will find a pressure switch made by the company Asco, previously Sirai. This model is the P303 T01. This pressure switch is rated for a maximum contact load of 20A n 3 poles. The pressure switch can be adjusted between the 0,5bar and the 1,4bar. The fitting on the bottom is a ¼” BSP-G thread. For a tube between 4-6mm. The maximum...

On this product page you will find a anti vacuum valve. This valve is made completely out of brass and can be easily disassembled. This type of anti vacuum valve is used with quite a lot of espresso machine brands. This valve has a male ¼”BSP-G thread. The o ring inside the valve is made from HNBR, but the o ring end stop is made from PTFE. As mentioned...

A lever brewing group uses slightly different parts then a normal pump driven espresso machine. This is the same story for the shower screens used. This shower screen made by the Italian company IMS Filtri is a example of this. This shower screen clamps around the sleeve of the brewing group to keep it into place. The outer diameter of this shower screen...

Safety valve 1/2"1,8 Certif CE PED IV

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or V gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 51mm, the inner diameter is 38mm and the thickness is 7,5mm. This gasket is made in Italy.

On this page you will find a piston gasket suitable for multiple espresso machine models. You can find this piston gasket on Rancilio and Faema Lever brewing groups. The outer diameter of this piston gasket is 50mm, the inner diameter is 38mm and the thickness of the gasket is 7,5mm. On Rancilio espresso machines you can use them on the Rancilio Z9,...

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...

To seal off the piston on a lever espresso machine in most cases there is being used a piston gasket or X gasket. The X gasket is in almost all the cases the lower piston gasket. This gasket compressed against the piston sleeve to seal off the piston itself. This piston gasket is made from NBR. The outer diameter is 50mm, the inner diameter is 38mm and...

Aurora Brugnetti inox ball bearing Return to the Aurora-Brugnetti lever parts overview

The P203T01 is also manufactured by the company Asco, in the past the name of these pressure switches was Sirai. This name change happened for all the products of Sirai. This Asco Pressure switch is a 2 pole instead of a 3 pole pressure switch. With a full plastic cover. The P203T01 is a slightly lighter pressure switch. The pressure of this switch can be...