Bezzera Strega spare parts

This is a extra layer of protection for your Ulka espresso machine vibration pump. When your pump is running dry or way too much then specified, the temperature will rise and eventually electrical components will break down. With this thermal protector your vibration pump will be saved, but the thermal protection will fail. This specific model has a max...

The heating element on this page is a OEM/original Bezzera spare part. This element can be used on various domestic espresso machines. The Bezzera part references for this heating element are 5722207, 5722240 and 5722240TP  This heating element produces 1250/1450W at 220/240V. The submerges length of the element is 160mm. The flange of this heating...

Brass L Fitting 3/8" BSP-G MM Return to our fitting overview

On this product page you will find a front stop for various Bezzera Lever groups. This item has the Bezzera part reference of 5473002.01  You can find this rubber stop on models such as the Bezzera B2000-AL, Bezzera 2006-AL, Bezzera Ebbis AL, Bezzera Ellisse AL and the Bezzera Strega lever group

On this page you will find a fibre gasket with a outer dimension of 41mm a inner one of 33mm and height of 3mm. This fibre gasket is used for a heating element with a flange diameter of 1”. This specific heating element gasket is used for Bezzera(5492004) espresso machines with the models: Bezzera BZ35, Bezzera BZ40, Bezzera Galatea Domus and the Bezzera...

Probably the most used pressure switch used on the Asco P302/6 a 3 phase pressure switch. This pressure switch has been used espresso machines like: La Marzocco, Faema, Cimbali, Astoria, Wega, Nuova Simonelli, La Spaziale, San Remo and so on.The brand Asco used to be the company Sirai, since a while this name has changed but the product remains the same....

Seeger ring 9mm

On this product page you will find one of the most commonly used pressure switches. The Ma-Ter XP110 pressure switch. This pressure switch is rated from 0,5bar up to 1,5bar. The pre-calibrated pressure is 1 bar. The brass fitting has a male ¼” BSP-G thread on it. This switch is rated to 16A at 125/250V.

On this product page you will find a lever piston used from 03 2006 in various Bezzera lever groups such as the Bezzera Strega, Bezzera Ellisse AL and the Bezzera Ebbis AL. This piston has been made from brass and has a outer diameter of 50mm. The Bezzera part reference for this piston is 5224201

On this product page you will find the main spring for a lever brewing group. This spring is mainly used on older models of Bezzera espresso machines. This spring has a overall length of 131mm. the outer diameter of this compression spring is 46mm. The material used for this spring is just regular spring steel which has been galvanized. You can use this...

On this page for Bezzera Strega parts you can find a bearing shaft for the modern Bezzera Strega lever group. This item is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 5244006. The axle has been made out of steel and has a length of 61mm and a outer diameter of 11mm. This axle has a knurling pattern which is off centered.

On the back of the lever group of the Bezzera Strega you can find a contact thermostat, this mainly has to do with the integrated heating element. So that when the group is at the right temperature the heating element will stop heating. The Bezzera part reference for this part is 7634808 This contact thermostat is set at 95 degree Celsius. At the base is...

On this page for Bezzera Strega parts you can find a lever fork for the Bezzera Strega modern lever group. This item is a OEM/Original spare part. The Bezzera part reference for this item is 5287003NC This lever fork has been made from brass and then been nickel plated. The internal thread inside the fork is a M16 thread with a fine pitch. The holes for...

On this page you will find a OEM/Original lever group fork made by the Bezzera brand from Italy. This fork is used in various lever brewing group models with the Bezzera brand. The part reference of this item is 5284501.01NC This lever fork is the connection between the piston and lever itself. This part has been made from casted and machined brass. After...

On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...

On this product page you will find the portafilter gasket for the Bezzera Strega. This portafilter gasket is a OEM/original Bezzera spare part. The Bezzera part reference for this item is 7493020 This portafilter gasket has a outer diameter of 73mm a inner diameter of 57mm and a thickness of 7,5mm.

Bezzera lower damper

On this product page you will find a heating element used in the Bezzera Strega lever group. This heating element keeps the body of the brewing group on 95degree Celsius. The Bezzera part reference for this item is 5963098.01 This cartridge heating element produces 100W at 230V.

On this page you will find a 2 way solenoid valve manufactured by the company Parker, this specific valve has been produced in Italy. This solenoid valve is mainly used as a water inlet valve and a steam and water valve solenoid. The Parker part numbers for this item are 397442 and 397443. This solenoid valve is a version which has a female threaded in...

On this page you will find a rubber back stop used with a variety of and newer lever espresso machine brewing groups. You will find this back stop on Astoria and Wega models pre 2001. Currently you can find them on brewing groups used by Bezzera 5473001 , Pavoni 477020, Victoria Arduino 17000018, Wega WY15101 and Brasilia 01431.0.00.02. For Pavoni groups,...

The item on this page is a female plug. This female plug can be used with a variety of espresso machine applications. You can use this fitting to plug male threads, don’t forget to order a gasket or thread sealant! This plug has a 1/8” BSP-G thread on the inside. The fitting is made from brass. In some cases it is possible that you get a nickel plated...

On this product page you will find a lever pin suitable for various Bezzera Lever brewing groups. This lever pin can be used on the Bezzera Ellisse Al, Bezzera Ebbis Al, Bezzera Strega, Bezzera B2000 AL and the Bezzera B2006 AL. The Bezzera part reference for this item is 5244007CN This steel lever pin has a diameter of 9mm and a length of 26mm.

Bezzera group elbow fitting Return to the Bezzera lever parts overview

On this product page you will find a Bezzera Strega support lever group compression spring. This item is a OEM/Original spare part from Bezzera. The part reference for this item is 5471538  This stainless steel compression spring has a length of 78mm and a outer diameter of 28mm. Dit is not the main brewing group lever spring. That is a spring which is...

On this product page you will find a heating element suitable for a single group Bezzera espresso machine boiler. This Bezzera heating element has the part reference 5722240. This heating element supplies 1250/1450W at 220/240V, the element has 2 connecting poles. The immersed length of the heating element is 160mm. This is a screw in heating element and...

The item on this product page is a male 3/8” plug. These plugs have various applications, but mainly as it indicates, closing off something. This male plug is normally used with PTFE tape or with a flat gasket/copper gasket. This male plug has a 3/8” thread, the tread type used is a BSP-G thread. This item has been made in Italy.

On this page you will find a rubber support mount for a vibration pump. This support has 1 central hole and a mounting hole. The mounting hole is for connecting the rubber pump support to the frame of the espresso machine. The other hole is for sticking the espresso machine vibration pump true, this is a press fit. For each vibration pump you need 2...

Quite often you see that bearings are used in sort of a way. The same in this situation with a lever brewing group. The bearing in this case is slid over the bearing pin axle. When you lower the lever the bearing will make the action more easily. This bearing has a inner diameter of 10mm so it can be slid over the bearing axle. It is a sealed bearing so...

On this page for Bezzera Strega parts you will find a wired microswitch. This microswitch is a OEM/Original Bezzera spare part. The Bezzera part reference for this item is 5963110.01. This item is only suitable for the Tank Top version.

The item on this product page is one which can be used on various Ulka espresso machines vibration pumps. This pump inlet can be used with brands such as Grimac, Elektra, Fiorenzato, Rancilio, Saeco and Gaggia. The Ulka part reference number for this item is 8.01.033 This 90 degree fitting has been made from a plastic called santoprene. The internal pump...