Kuulalaakerivipuryhmä
Fiorenzato piazza san marco lever group ball bearing. Replacing your old bearing with a new one makes a huge difference in smoothness. Return to the Fiorenzato lever parts overview
20,68 €
0
Oma ostoskori
PTFE-vipuryhmärengas 50x44x4mm
27,69 €
22,89 € ilman veroa
GDPR-yhteensopivuusHenkilötietojesi suojaaminen
ToimitusehdotKaikki tilauksesi toimittamisesta
Palautuspolitiikkakaikki majatalot palautuskäytännöistämme
This flat PTFE gasket is used on various lever espresso machine brewing groups used on the brands Fiorenzato and Vibiemme. The Fiorenzato part reference number is A1200190 and the Vibiemme part reference number is GUARTEFANPIST.
This flat gasket is made from PTFE. The outer diameter is 50mm, the inner diameter is 44mm and the thickness is 4mm. The gasket has a split in the middle of the gasket for installation, so it is not broken.
You can use this flat PTFE gasket ton the Vibiemme Replica and the Fiorenzato Piazza San Marco.
16-052-L-1186800
2 Tuotteet
Lisätiedot
- Brändi
- Fiorenzato C.S.
Vibiemme - Kirjoita osa
- Gasket
- osa numero
- Fiorenzato A1200190
Vibiemme GUARTEFANPIST
Kommentit (0)
Tällä hetkellä ei ole asiakkaiden arvosteluja.
8 other product
Silicone piston gasket 52x40x7mm
This type of piston gasket is one of the most used models in the lever espresso machine world. But this one is different. Yes the dimensions are the same 52x40x7mm but the material is different then with the standard piston gaskets. They are made from clear silicone. This will make them last a lot longer then the standard ones made from NBR. The type of...
3,46 €
Joustoputki 1500mm 3/8 FF kartiomainen pohja
The flexible tube on this page has a overall length of 1500mm. This includes the fittings. The fittings on this pipe are female 3/8” BSP-G and both have a conical base, so there is no gasket needed. The tubes are rated up to 10 bar and with a maximum working temperature of 90 degree Celsius.
13,64 €
Astoria portafilter tiiviste 66x56x6mm
On this page you will find a portafilter gasket specially suited for lever espresso machine brewing groups. This specific portafilter gasket is suitable for brands such as the Astoria, Pavoni, Wega, Victoria Arduino, Fiorenzato and Brasilia lever groups. (seen they are the same model of group) This specific gasket has been made from NBR. This gasket has a...
2,77 €
Varoventtiili 3/8" 2,0 bar CE PED IV sertifioitu
On this page you will find a certified boiler safety valve, it has CE-PED. This boiler safety valve is one of the most common types around. This valve is pre-set at 2,0 bar and can’t be changed. On the inside of the valve is a FKM gasket, the spring installed is made from stainless steel. The steam discharge rate when opened is 969 L/min. This valve has...
12,87 €
La San Marco -vipukahva
La San Marco lever handle. The lever doesn't come with the handle and top screw. these can be ordered seperatelyReturn to the San Marco group parts overview
53,71 €
Paperilevy 66x58x0,8mm
On this page you will find a paper shim, these shims are used to fill up the wear of the brewing group and or the wear on the portafilter. This shim is placed above the portafilter gasket itself which makes it possible to make fine adjustments. This portafilter shim has a outer diameter of 66mm a inner diameter of 58mm and a thickness of 0,8mm This paper...
0,96 €
Fiorenzato tai renkaan pohja
A variety of espresso machines use a extractable brass sleeve inside the brewing group. This brass sleeve needs to be sealed off. There is a upper and lower seal. The lower o ring seal is the one on this page. This o ring has been made from EPDM. The cord diameter of this o ring is 3,53mm and the inner diameter of this ring is 56,75mm. This specific o...
2,99 €