La Pavoni Stradivari ammattilainen - Panimoryhmä

Is your la Pavoni Europiccola or Professional leaking from the pre-millennium brewing group? This basic gasket set might be handy. The set contains all the basic gaskets where a pre-millennium brewing group could leak on. The most common location of the brewing group are the piston gaskets. From using your machine too much, or just too little. Seen the...

The earlier models of the La Pavoni Europiccola already had some sort of a protection to keep the sight glass safe. These sight glass protectors were installed at the same moment that the sight glass was installed. Seen they needed to slide over the sight glass completely. In the 1990ies you get the first models of plastic cover, the stainless-steel cover...

The item on this product page is a lip seal or shaft gasket. This seal closes off the piston shaft, but you are still able to move the lever. This shaft gasket van be used on early pre-millennium brewing groups as well on millennium brewing groups. The item can be found on domestic La Pavoni lever espresso machines, as well on Gaggia espresso machines....

The o ring on this page can be used as a seal between the lever brewing group and the water boiler of a variety of La Pavoni domestic lever espresso machine models. The La Pavoni part reference for this item is 465128 This o ring is not suitable for the old models, the ones which screw into the boiler. Besides that you can use this o ring on every group....

The item on this page is a is a stainless steel retaining ring. This retaining ring can be used on various domestic lever espresso machines made by Gaggia and La Pavoni. These retaining rings can be used on pre-millennium and millennium lever brewing groups. The Gaggia part reference is S404101 and the Pavoni part reference is 410011. This stainless steel...

The piston shaft on a La Pavoni Home lever espresso machine. This shaft transfers the movement of the Lever on the brewing group (3954004) true the piston pins (3140463) to the piston shaft (312382 ). At the bottom of this piston shaft is of course the piston (314044) located. The item has a overall length of 111mm and M10 threads, this item is a original...

the item on this product page is a sight glass gasket used on various domestic La Pavoni and Gaggia lever espresso machines. This sight glass gasket can be used on pre-millennium as well as on Millennium brewing groups models. The La Pavoni part reference for this item is 362020 and for Gaggia the reference is S362020  This sight glass gasket has been...

The item on this product page is a shaft gasket for the steam valve on various domestic La Pavoni and Gaggia lever espresso machines. This gasket seals off the shaft from the boiler. This shaft gasket can be used on Millennium and Pre-Millennium models. The part reference for La Pavoni is 361023 and for Gaggia it is S361023. This gasket has been made from...

This small bushing is used on various domestic lever espresso machines of La Pavoni and Gaggia espresso machines. The La Pavoni part reference for this item is 3140453 and for Gaggia the part reference is S3140453. This bushing can be used on brewing groups pre-millennium as well as millennium brewing groups. The lever fork roller has a outer diameter of...

The portafilter shown on this product page is a bottomless portafilter which can be used on the famous La Pavoni Lever espresso machines. this model of portafilter is compatible with the La Pavoni Millennium brewing groups. So with the brewing group with the liner inside of the brewing group You can use this brewing group for instance on the La Pavoni...

The portafilter on this page is suitable for a post millennium brewing group used by La Pavoni and Gaggia Lever espresso machines, the ones for domestic use. This portafilter is Not suitable for the older pre-millennium brewing groups. The Gaggia part number for this item is S395307 and for La Pavoni the part number is 395307R  The portafilter is a...

La Pavoni Europiccola complete group pistonReturn to the  Pavoni Europiccola group parts overview

This tamper is made from from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from American walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millennium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Mignon. The Gaggia part reference for this item is S395307 and for La Pavoni the...

The item on this product page is our own La Pavoni Europiccola bottomless portafilter. This portafilter is only suitable for the La Pavoni millenium brewing groups. You can use this portafilter on various models such as the Pavoni Europiccola, Pavoni Professional, Pavoni Stradivari. But also on the Domestic Gaggia lever brewing groups. The Gaggia part...

This shower screen is suitable for the pre-millennium La Pavoni lever brewing group, this is only for the domestic lever espresso machines. This filterbasket is manufactured by the Italian company IMS filtri. The shower screen has a outer diameter of 52mm and a height of 14mm. it has been made from stainless steel. The Pavoni part reference for this item...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from European walnut which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles...

La Pavoni portafilter gasket 60x50x5,5mm. Only suitable for Millenium machines

On this page you will find a stainless steel filterbasket. This filterbasket is suitable for the La Pavoni Post millennium brewing groups. This single filterbasket has a outer edge which is 60mm. the height of the filterbasket is 20,5mm The filterbasket itself can hold approximately 7 grams of ground coffee for a single coffee. For which models is this...

On this page you will find a standard shower screen for post millennium La Pavoni and Gaggia lever brewing groups. This specific item has been manufactured by IMS Filtri, not a competition shower screen. Part number is PADE105. This shower screen has a outer diameter of 54mm and the height of the shower is 14mm. the distance between the holes is 2,00mm...

The o ring on this product page is used on various La Pavoni and Gaggia lever espresso machines. This o ring is used to seal off the steam tube at the steam valve. This o ring can be used on later models pre-millennium and millennium steam valves. The part reference for La Pavoni is 465017. This o ring has been made from FKM. The cord diameter is 1,78mm...

The steam tip on this product page is a OEM/original La Pavoni spare part. This steam tip can be used on various domestic La Pavoni lever espresso machines. The La Pavoni part reference for this item is 3134304. This steam tip has been made from chrome plated brass. The tip has a m6 thread on the inside. There are in total 3 holes, these holes have a...

The item on this product page is a brass washer which can be used on various domestic La Pavoni and Gaggia Lever espresso machines. This includes pre-millennium and Millennium brewing group models. This washer is used in the steam valve. This washer spreads the force equally over the shaft gasket. There are 2 washers installed in each valve. The Gaggia...

La Pavoni Europiccola boiler manometerReturn to the  Pavoni Europiccola group parts overview

The filterbasket on this page is a 2 cup filterbasket made out of stainless steel. This specific model of filterbasket is suitable for La Pavoni post millennium lever brewing groups. The pre-millennium filter baskets won’t fit. The double filterbasket has a outer edge of 60mm and a height of 25mm. This filterbasket can hold approximately 12 grams of...

La Pavoni Europiccola water level plug

On this page you will find a brass tube which is used in a variety of lever espresso machine models. This brass tube is used in the pre-millennium and Millennium brewing groups of La Pavoni and the millennium groups of Gaggia. The La Pavoni part reference is 326002 and the Gaggia part reference number is S326002. This brass suction pipe has a outer...

On this product page you will find our own produces piston gaskets suitable for a variety of la Pavoni models such as the La Pavoni Europiccola La Pavoni Professional, La Pavoni Stradivari, La Pavoni Mignon, Gaggia 105 lever groups and so on. The Gaggia part reference for this item is S361005, for La Pavoni the part reference is 361005. These gaskets are...

The item on this product page is a fork pin. This pin connects the piston shaft and the roller in the back to the piston shaft. This pin can be used on various domestic La Pavoni and Gaggia lever espresso machines. This fork pin can be used on pre-millennium as well on millennium espresso machines. The Gaggia part reference is S3140463 and for La Pavoni...

On this page you will find a pressure gauge fitting for the domestic La Pavoni lever espresso machines. The part is a original OEM part with the La Pavoni part number 3120104. I want to install a manometer on my La Pavoni Europiccola can I use this item for it? NO. This item is not suitable on a La Pavoni Europiccola espresso machine. The threads used on...

This tamper is made from Stainless steel EN 1.4301/AISI 304 with a smooth machined finish. The bases are laser engraved with our logo and the 51,5 mm diameter of the base of the tamper. All our tampers are made in The Netherlands The handle is made from birch which has been hand oiled 2 times. Try to avoid contact with water. Seen the handles are natural...

The item on this product page is a flat gasket used on various applications on the Gaggia and La Pavoni lever espresso machines. You can use this gasket on the sight glass fittings and the sight glass top nut. As well as on our conversion kit for the Manometer. The part reference for Gaggia for this item is S362021 and for Pavoni it is 362021.  This...

On this page you will find a perforated washer suitable for Gaggia and La Pavoni domestic lever espresso machines. The part number for Gaggia is S314044 and for La Pavoni 313002. This washer is suitable for the Pre-millennium and Millennium brewing groups. We had this perforated washer cut with a CNC water cutter, instead of having it had punched. After...

On this product page you will find a precision shower screen which is suitable for Post millennium La Pavoni and Gaggia lever brewing groups which have a 54mm brewing group. This item is manufactured by the Italian company IMS Filtri and has the article number PA200IM54 The external diameter of this shower screen is 54mm, the internal diameter is 49mm and...

The sleeve on this page is used in various millennium La Pavoni lever groups, as well as the domestic Gaggia lever groups. The part reference of this plastic sleeve for La Pavoni is 371133 and for Gaggia the part reference is S371133. This sleeve is a OEM/Original La Pavoni part. This item is used in combination with a o ring which has a inner diameter of...

The washer on this product page is a OEM/Original La Pavoni spare part. This washer can be used on  various locations with the domestic lever espresso machines made by la Pavoni. The Pavoni part reference for this item is 313003  and for Gaggia the reference is S313003  This washer is suitable for Pre-millennium as well for Millennium espresso machines....